Re: LG 50" PK540 Plasma Clicking, not turning on.

Anybody have any more suggestions?

Re: LG 50" PK540 Plasma Clicking, not turning on.

HI thanks for the reply

They each check out @ 10 Ohm and have continuity

I also removed them and put 3w across them @ 5v to see if they broke down under load

Re: LG 50" PK540 Plasma Clicking, not turning on.

Just to add I seam to be getting 5v on the STBY 4v on the RL ON and about 3v on the AC DET but its hard to tell as it only jumps up briefly as its clicking

Re: LG 50" PK540 Plasma Clicking, not turning on.




Hi i'm having the same problem LG 50PK350_ZB with the clicking and not turning on just the red standby light showing, the TV was ok till one day it just went off and wouldn't come back on.

I know this is an old thread but didn't think there was any point starting another on the same problem

Hope someone can give me a few pointers

I have checked the 3 large 10 Ohm resistors, Diode @ D304 3 fuses and replaced the voltage regulator and also tried another main...