simsuhow
Member
Last Activity: 03-02-2025, 07:42 AM
Joined: 12-30-2020
Location: Johor
-
Or can someone suggest how to find where exactly is the value to edit in hex editable for cam enable? -
NEC VKT16B-5 use Lenovo NM-B891 board, please help to enable camera
Hi, I bought second from someone this NEC VKT16B-5, and found that it actually have camera but was disabled, not detect at all in device manager, can't find any setting in BIOS.
And it use LENOVO NM-B891 Rev.2 board, so, I tried to flash a BIOS downlaoded from here
[url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/bios-requests-only/90826-lenovo-t490s-bios-password-request/page2[/url]
reply #21, so, I confirm the camera works fine.
Is anybody can help to modify... -
My name is Jim, from Malaysia, own a small computer shop, doing this field for more than 10 years.
In this forum for few years already, gain a lot of experience and help from here.
Hope this forum last forever!!!Leave a comment:
-
Some one please help, same status as #3 Laptop keeps on restarting with no display but if i remove ram then it does'nt restart.
I tried all other provided bin, machine trigger and 0.02A and stuck.
Attached backup of both U5 and U6.
Advanced thanks
Board: VILE2 NM-A044 Rev: 1.0
[B]Edge E531 (ThinkPad) - Type 6885[/B]
Serial: PF019PE
Some one please help, same status as #3 Laptop keeps on restarting with no display but if i remove ram then it does'nt restart.
I tried all other provided bin, machine trigger and 0.02A and stuck.
Attached...Leave a comment:
-
Technician from Malaysia, chip level, nice to meet everyone, gain a lot of experience and thoughts from BadCaps so far. Like it so much.Leave a comment:
-
Thanks Mindigital, BIOS working, light up, recognize m.2, just Bitlocker key lost, need re-format, thank!Leave a comment:
-
Can someone help to fix?
Problem is, original BIOS keep restarting before logo.
Already tried some bios found here, worked but can't save service tag and not detect M.2
Attached my ori BIOS 8BM & 16MB
Inspiron 5406 2-in-1
Service Tag: 7J4ZM93
Board: HELLCAT 14 MS TGL 8L 19860-1...Leave a comment:
-
Re: help me lenovo x250 power on and black screen
Erm, I agreed, Thanks anywhere, hoaca388.Leave a comment:
-
Re: help me lenovo x250 power on and black screen
Thanks hoaca388, tried #61, still 4 beeps.Leave a comment:
-
Re: help me lenovo x250 power on and black screen
Hi, can anyone please help.
X250 can on, no display, 4 beeps error.
Type: Type 20CL-S18C0A
S/N: PC-0BBDSR
[ATTACH]311480[/ATTACH]...Leave a comment:
-
Compaq Pro 6300 SFF Schematic
Hi, can anyone provide Compaq Pro 6300 SFF Schematic?
Need to know how many ohm for resistor R1421. Thanks -
Re: Asus S400CA Rev 3.1 Disable Onboard Ram
Nvm, already fixed, on board RAM have no problem, resoldering one of the resistor fixed the problem on board RAM, already tested and past back to customer. Thanks anywhere.Leave a comment:
-
Asus S400CA Rev 3.1 Disable Onboard Ram
Hi, can someone help to provide the way to disable onboard RAM for Asus S400CA Rev 3.1?
I tried Rev 2.1 way, to switch 2 resistors but not working, board still recognise on board RAM.
What I switched :
R2425 -> R2423
R2424 -> R2422
Thanks. -
Re: New Members - please post your introductions here
Hi, everyone, am from Malaysia, nice to be here.Leave a comment:
No activity results to display
Leave a comment: