Re: smd capacitor markings
thank you very much. i'll order the 16v ones from digikey today. 'll let you know how it works...
thanks again
blutch
Member
Last Activity: 10-22-2012, 01:22 PM
Joined: 03-21-2011
Location:
-
Re: smd capacitor markings
if mine has a height of 8mm w/base wouldn't it be best to match it for ripple, or is that not important in this caps area? Sorry I'm just a wanabe, do it yourself electronics nubee, trying to learn.
thanks for the help.....
also i order from digikey regularly.... my preffered place.Last edited by blutch; 10-23-2011, 07:45 PM.Leave a comment:
-
Re: smd capacitor markings
sorry about the pic quality. to get it that good i had to shoot it through a magnifying glass.
the diameter is 6.3mm, and height w/base is 8mm.
the black chip next to it is as follows.
NIKOS
P1703BDG
VN14J3718
hope this helps, as my son would like his expensive vid card to work again.
the card is an MSI NX8600GTS pci video card.Leave a comment:
-
Re: smd capacitor markings
it does have a base, my son knocked it off installing the vid card. i hope this pic helps some. the card has surface or thru hole mounting for that cap.
thanks for the help...
it does come up as 94 on my capacitor meter...Last edited by blutch; 10-23-2011, 04:51 PM.Leave a comment:
-
smd capacitor markings
hello, I'm trying to read the values of this solid smd capacitor that came from a MSI 8600 gt video card. the values printed on it are as follows..
7Z
100
EZA
any help would be appreciated.
thanks... -
solid smd cap markings
hello, I'm trying to read the values of this solid smd capacitor that came from a MSI 8600 gt video card. the values printed on it are as follows..
7Z
100
EZA
any help would be appreciated.
thanks -
Re: viewsonic vx922 revisited
no only minimal with the board out of the monitor. but if i put it back in and hook everything up.....plugged in, with the power switch off, i get a constant 12.42v. as soon as i turn it on, with the power switch. the voltage starts to fluctuate from 12.42v down to 4v. in sequence with the green led on the switch. also there is a faint clicking noise in time with the others.
thanks for any help on this, i'm new at this forum thing....Leave a comment:
-
viewsonic vx922 revisited
when i disconnect the power board completly, minimal voltage.
as far as caps i replaced....NRWA series M for the two 470uf 25v (mine are 35v), and another no name with just an M on it for the one 330uf 35v.
the 2 big caps on the logic board g-luxon 411b(M) 330uf 16v, and one sheng 100uf 25v on the logic board. i have panasonic fm caps coming to do a total reswap.
if i put it all together again and plug it in with the power switch off i get a constant 12.42 v on the 12v connector between boards.
i recapped an identical monitor 2 weeks ago, and have been useing it... -
Re: vx922 recapped still fluctuating power
what do you see?????...Leave a comment:
-
Re: vx922 recapped still fluctuating power
ok i sent the pics.
when i disconnect the power board completly, minimal voltage.
as far as caps....NRWA series M for the two 470uf 25v (mine are 35v), and another no name with just an M on it for the one 330uf 35v, also the 2 big caps on the logic board g-luxon 411b(M) 330uf 16v, and one sheng 100uf 25v on the logic board.
if i put it all together again and plug it in with the power switch off i get a constant 12.42 v on the 12v connector between boards...Last edited by blutch; 03-24-2011, 07:39 PM.Leave a comment:
-
Re: vx922 recapped still fluctuating power
is the circled fuse 1 supposed to be connected to the12v connector ? looks like the fuse moved , but is still connected well.
as for power when disconnected from the rest. no very minimal. when they are all connected, and the power switch is off, i get a steady 12.42v.
as for the type of caps, not sure it was all i could find at alfatronics. but i have all new panasonic fm caps comming from digikey soon.
thanks...Leave a comment:
-
vx922 recapped still fluctuating power
i also have a vx922 with fluctuating power from the 12v rail between boards. i have replaced all caps but the large 400v. still the power goes from 12v to 4v and repeats over and over. and the screen and green power light blink in time with it. what else could be the problem? -
Re: ViewSonic VX924 No power - Not the usual suspects
i also have a vx922 with fluctuating power from the 12v rail between boards. i have replaced all caps but the large 400v. still the power goes from 12v to 4v and repeats over and over. and the screen and green power light blink in time with it. what else could be the problem?Leave a comment:
No activity results to display
Leave a comment: