Re: RTX3070 Gaming pro power issue
Cannot find a schematic, so will just use diode mode to trace from the mosfet to the correct capacitor
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: RTX3070 Gaming pro power issue
Hi foshland
Didn't even cross my mind to inject voltage on the VRAM circuit, thank you for that, that is why two heads are better than one as they say, will share my findings with you, may not get to it until Thursday/ Friday as work is manic at the moment
Leave a comment:
-
Re: RTX3070 Gaming pro power issue
Hi foshland
I think you are right about the Pex Circuit, but I'm thinking this card has other issues, as the Vram resistance on this card is only 6.7 Ohms, have another rtx3070 here and the resistance on the Vram is 38 Ohms, & from what i can see it should be 30+ Ohms, will look at the pex system later though and let you know my findings
Leave a comment:
-
Re: RTX3070 Gaming pro power issue
Hi foshland
thanks for the reply, the 1.8v is there all the time, can be measured from the bios and coil by the PCI Slot, but pex is there on first power for around 15 seconds
voltages on the VRM again are there on power on but drop to zero, same with the Vram
Leave a comment:
-
RTX3070 Gaming pro power issue
Hi
have an issue with a Graphics card, am new to repairing graphics cards so will explain my findings as best I can
12v 3.3v 5v 1.8 & plex all present for about 15 seconds
then no plex, no voltage on the VRM no voltage to VRam 12v 3.3v & 5v remain present
I suspect faulty VRam as the resistance from what I believe to be the ram coils see picture with green box, is only 6.7ohms, shouldn't this be a higher resistance ?
2 of the VRam chips have black spots in the corners am not sure if this from the factory have enclosed a picture of this...
No activity results to display
Show More
Leave a comment: