Re: Original Xbox Replacement Caps
Sorry for the question but 3300x3=9900 isn't it different from 5x1500=7500? Or there is another factor I don't get?...
Armandooooo
New Member
Last Activity: 04-25-2021, 01:13 PM
Joined: 11-08-2020
Location: Morges
-
Re: Original Xbox Replacement Caps
Hi all,
The ZLQ does not exist in 3300uF and for the uhv I see their specs are 16mohm and 2500mArms, which is close but still a bit far off. Are they working fine with those?
Thank you...Leave a comment:
-
Re: Original Xbox Replacement Caps
Yes, correct, the famous bulging ones!!...Leave a comment:
-
Re: Original Xbox Replacement Caps
Hi all, I have read through the post and even if there seems to have substitute to the Nichicon HM 3300uF ones proposed, they do not match ESR or ripple current (12mohm and 280Arms). I found Panasonic FJ matches exactly but seems an odd product that we cannot find... Any of you have a try with polymer? Even if this is more expansive.
Thank youLast edited by Armandooooo; 01-27-2021, 05:42 AM.Leave a comment:
-
Re: Original Xbox Replacement Caps
Because now my xbox start to have flickering on 2D images, and I presume it is from the caps. Which one? I don't exactly know so as I want to preserve it I prefer to do it all so I am good for the next 20 years.
Do you believe this comes only from the one near the CPU?
Thank you,
Armand...Leave a comment:
-
Re: Original Xbox Replacement Caps
Thank you very much! If you happen to know for the others I need also :
25v 22uf Nichicon VR (5x11mm)
25v 100uf Nichicon VR (6x11mm)
10v 3300uf Nichicon PW (12.5x25mm)
16v 1500uf Nichicon HD (10x20mm)
2.5V 1F Nichicon UC
SMD:
16v 47uf Nichicon WX
16v 10uf Nichicon WX
Thanks again...Leave a comment:
-
Re: Original Xbox Replacement Caps
Hi everyone,
I would like to save my baby version 1.4 and although I have read the entire post, I could not find any suitable reference for the replacement. It was very useful for getting the reference of my current one. Does anyone have the corresponding replacement?
I am interested in having well recognize brand.
Thank you,
ArmandLeave a comment:
-
Re: New Members - please post your introductions here
Hello,
I am into retro gaming and would like to preserve my babies from extinction. Looking into caps reference and see which one can be replaced with an alternative brand or model.
Hi everyone.
ArmandoooooLeave a comment:
No activity results to display
Leave a comment: