Re: Dell W1700 LCD Rev00
the link if for
"Global Sources for Aluminium Electrolytic Radial Capacitors"
i know that these companies carry more that just caps. i have searched there wedsites and cat. only to come up short. i have looked for a manufacture with a capital 'A' in the circls, nothing. i have asked the sellers of the boards of they could help, nothing.
i won't give up just yet but i can see how a link to digikey ect. is going to help.
dave
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Dell W1700 LCD Rev00
mario
thanks.
i will order a few and i will also look up the reference sheet.
that link is for suppliers. i guess its good.
where did you get the info about the hexfet?
dave
Leave a comment:
-
Re: Dell W1700 LCD Rev00
i don't know if they can be found/crossreferenced. i have look and nothing. no data sheets either. maybe it could be a generic one but how wants to do the trial and error associated with finding the right one. a schematic would help. if current values were know, a suitable replacement could be substituted. an electrical engineer could figure it out.
dave
Leave a comment:
-
Re: Dell W1700 LCD Rev00
mario
use this link
[email]customerservice@lcdrepair.us[/email]
daveRe: Dell W1700 LCD Rev00<br /> <br ... <br /> daveRe: Dell W1700 LCD Rev00
mario
use this link
[email]customerservice@lcdrepair.us[/email]
dave
Leave a comment:
-
Re: Dell W1700 LCD Rev00
i see the fuses and i don't know why thery are soldered over. i would send them an email with the pictures attached and asked why is f1 and f2 mising.
i don't know of any other place that sells the replacement. if you can't get threw to the company, i will be more that happy to send them an email.
please let me know.
dave
Leave a comment:
-
Re: Dell W1700 LCD Rev00
Mario
can you look at the transistors Q 80 81 40 41 on the new board when it comes in and tell me what the markings are? the company that sells it says that they have a better version and that it should last a good while. i am wondering if they replaced the transisters as a precaution.
thanks
dave...
Leave a comment:
-
Re: Dell W1700 LCD Rev00
you stated that your board had buldging caps. this is different that the board i had, the caps on my boaed were not buldging at all. so the caps and fuses replacement should be all this board needs. if no one wants it , i will get it from you. the connector shouldn't be much of an issue. could you post a pic of it?
also , i am glad that we all are working together on this......
thanks
dave...
Leave a comment:
-
Re: Dell W1700 LCD Rev00
not sure if ther are mosfets......
the manu facture has a symbol like this @ only the a is a capital A.
there are a few more #'s too
the stamp on the chip is listed below. there are no markings under the chip.
also the company that sales the replacement has a better rev. so i would bet that they know the part # that works.
@ 4600
BD313K
dave...
Leave a comment:
-
Re: Dell W1700 LCD Rev00
how about donating the old board for the betterment of the cause?
dave
Leave a comment:
-
Re: Dell W1700 LCD Rev00
transistors are used. but the IC type instead of the norm.
the 4 8-pinned ic's are Q80 Q81, Q40, and Q41.
the manufacture is an "A" with the circle around it .like "@" only captial.
the markings are
@ 4600
BD313K
i believe that this is the problem. i have searched the interweb to no avail for the description #. if i could find the manu. with that @ symbol, it would help a lot.
dave...
Leave a comment:
-
Re: Dell W1700 LCD Rev00
they are the 4 8-pinned ic's near the caps
i have been looking for those specific driver via the marking on the chips. i have had no luck. if i had a diagram of the ic, i could find the right sub for it.
so this is where i am stuck. if someone has a source that could match the markings on the ic, it would help .
thanks to everyone who has had input.
daveLast edited by davetech; 11-15-2007, 04:07 PM.
Leave a comment:
-
Re: Dell W1700 LCD Rev00
schnipke
what is the part# from radio shack for the caps?
i bought mine from mouser
Xicon low ESR Radial Electrolytic,
25v 220uf 105c.
i really don't see why my board repair failed but i have to keep trying.
he's dead jim,
i didn't know that there was a schematic for it. can you post or send me a copy? i should be able to get it with that.
i have had a few emails from people wanting to get their board fixed, i can't do it until i know all of...
Leave a comment:
-
Re: Dell W1700 LCD Rev00
they are coils. they may have some markings on them , not sure. a mouser catalog will do you good, it will do all of you repairing guys some good.....
so, i changed my fuses and caps today..... the fuses blew again .... so i have to find the cause of the current surge. i will take another look tomorrow and i will order the parts.
i will let you know. i have an idea what is causing the issue but i could be 100% sure if i have a working board.....
dave
Leave a comment:
-
Re: Dell W1700 LCD Rev00
thanks bob for your hard work. now i can get this one fixed.
hey , if anyone else needs one (there's) fixed, i would be glad to do the work and i am sure that maybe a few others would want to help out.
Pm me or email me directly.
dave
Leave a comment:
-
Re: Dell W1700 LCD Rev00
fuses?
where can i/we ge the fuses and does anyone know the amperage?
they have a NF silkscreened across them. i would think Nano fuse but , i am just pulling straws out of a hat. that fuses short to the caps so if the fuse is blown, the cap should be replaced anyway.
o yeah, i'm dave, new to the forum and i am trying to fix a display for a family member.
dave
Leave a comment:
No activity results to display
Show More
Leave a comment: