m041633n
Member
Last Activity: 04-08-2025, 11:23 AM
Joined: 10-09-2020
Location: chennai
-
Well I replaced the display. The Problem Solved π πͺ... -
Tried it Mr.Mon2Leave a comment:
-
Please somebody help me!Leave a comment:
-
GDM50 LA-L241P Rev 1.0 - 2 Amber and 7 White Led Fix Needed
Hello Everyone!
I would like to know the Jumper location for the 2 Amber 7 White Led Blink Code error. According to Dell 2,7 Led codes are for display or the Display cable failure. I didn't changed the display nor the cable. The issue happens only when restarting the machine from windows and from the BIOS. And when opening and closing the lid the display turns off and never turns back on. But the machine is working! I confirmed it by pressing the CAPS Lock key. Does anybody has this issue and fixed it by jumpering some fet near the display connector on the motherboard. If So Please Help... -
Leave a comment:
-
Please help??Leave a comment:
-
I tried reading the SuperIO ENE KB9022 Using CH341A But the IC Was not detecting! In neo programmer using these
pinouts
KSO3 GND PIN 4
KSI4 CS PIN 5
KSI5 CLK PIN 6
KSI6 MOSI PIN 3
KSI7 MISO PIN 2
Please Help me. I tried reading in TL866II βοΈ ICSP with no SPI DRIVER HEADER. But it shows only zeros. What should I have to do??Leave a comment:
-
On which component SMDFlea?? I am really sorry π that I irritate Professionals like asking these silly questions. Would you Please help me on this?? Thank you SMDFlea.
BTW I didn't flashed the SIO and I don't know how to flash the SuperIO using CH341A Programmer. Can you guide me on this please I don't have the Keyboard Flex Cable
Thank You SMDFlea!Last edited by m041633n; 01-08-2024, 09:57 AM.Leave a comment:
-
Any helpLeave a comment:
-
Any solution π??Leave a comment:
-
Tried it! But it didn't work π πͺ
It's still the same.
Checked the Old Bios Backup with ME Analyzer it says [B]BSD/CHT [/B]on the chipset support and checked the New BIOS [B]081F2.BIN[/B] it was matching the same [B]chipset support[/B]
How to start checking with the multimeter on which component with what settings on the multimeter. I don't know component level checking. It would be better if someone has the same board and same issue like mine and explain how did they resolved it. Please Help π desperate to solve this case.
π Thank You πTriedLast edited by m041633n; 01-02-2024, 04:53 AM.Leave a comment:
-
It's on lost or stolen mode I think! Check serial on icloud clean status servers Luke gsm serversΒ‘Leave a comment:
-
Tried removing these things from motherboard and turned on
HDD (HDD is working fine on a different computer and its intact.), CMOS Battery, Ram, all the flex connectors, WiFi Card, Battery, including the power button flex cable (shorted the power button connector on the board to turn on) still no display! Connected the display cable only for display.Leave a comment:
-
Hi I've Explained you everything in the post...Leave a comment:
-
HP 15-be002tu BDL50 LA-D702P Rev 3.0 Power's On But No Display!
Tried Flashing the Bios from HP Website with CH341a Programmer
(Extracted the BIN File using HP's "Copy BIOS image in order to use it on other devices" option)
Tried the First One 081EC From the 5 BIN file's (081EC, 081ED, 081EF, 081F2, 081F3) which was extracted and decrypted already with the BIOS Update Utility from HP.
But still the Same issue
the Laptop's powering up, the HDD is not spinning nor the hdd led is blinking nor the Caps Lock led is blinking nor the cpu is heating, there is no display! Cleaned the RAM and the RAM Slot with IPA. Tested powering... -
Hi there π I'm new here and I am a Computer π₯ Service Engineer who primarily works on Apple Mac's and sometime on Windows but all my background came from these wonderful people. My brother who was a computer Techie at a service center in chennai, my buddy magesh who had a 386 in 90's and we use to play NFS II SE, Mortal Kombat 4, MotoGP on Windows 98 SE and especially ameer who made me intrigued about pc's in the 90's by playing on his Windows PC Europress Rally, Moon buggy, Star Wars game play with me and my brother. We also watched Broken Arrow on Windows Media Player which intrigued,...Leave a comment:
-
Re: RCUnlocker
So how to unlock this modelLeave a comment:
-
Re: RCUnlocker
How do I get the exe file for flashingLeave a comment:
-
Re: RCUnlocker
I just downloaded Universal Bios Backup ToolKit 2.0 and dumped the bios and then unlocked the dumped bios with RCUnlocker. It just throwed me an unlocked bios file but not an exe file! How do I get the Windows flashable exe file and how do i flash the Unlocked file in windows without Flash Programmer
. I just tried flashing the unlocked bin file with hp flash utility but it refused flashing with invalid digital signature message. Any Help will be highly appreciated!. Thank You!
Leave a comment:
-
Re: RCUnlocker
Could anyone help me in unlocking bios password for my HP ZBook 15 G3. Will RCUnlocker remove password on my bios bin file or do i have to post the bios dump file here!Leave a comment:
No activity results to display
Leave a comment: