Re: Philips 37pfl9632d/10 no image after main board replacment

Okay well then i guess it’s doomed

Re: Philips 37pfl9632d/10 no image after main board replacment

Guys , I've bought another working dfi panel from 37pfl9732/10d , because my reball was unsuccessful and I can't make it work. I have found all the display diversity codes for that model and tried them all. When I disconnect the pcb lvds cable, tv boots , but when I connect it to the dfi ot goes into protection. Any advices? I can add the service manual if needed. Thanks in advance!

Re: Philips 37pfl9632d/10 no image after main board replacment

Reflowed chip on 3104 301 3034 and now it works. Thanks for the advice , I wouldn’t do it on my own )

Re: Philips 37pfl9632d/10 no image after main board replacment

Also when ssb cable is disconnected it does not bootloop �� probably a faulty 3104 301 3034

Re: Philips 37pfl9632d/10 no image after main board replacment

I've used 114 code no image when backlight is on. I can't turn it off as well

Re: Philips 37pfl9632d/10 no image after main board replacment

Thank you. I've tried the code but now the backlight is constantly turning on and off. Probably not the one , I'm not sure 🤔...

Re: Philips 37pfl9632d/10 no image after main board replacment

First photo is the 37” screen that I want to repair and the second is the 32” donor...

Hi guys and thanks for accepting me in your community. Firstly I want to say that I've never done any repairs on TVs , but I have basic electronic knowledge. So the thing is that my tv main board failed and I've found the same board but from a 32” screen. Tv powers up now but I don't have image on screen (backlight is on) . The 32” board connects directly to the tcon board but mine connects to other and then the tcon. I'll post photos later. I'm not sure if this is a firmware problem or hardware. However , I can connect the one cable straight from mb to tcon and get distorted image so I can...

Re: New Members - please post your introductions here

Hi guys , and thanks for accepting me in your community !
Im 29 years old , an old forum junkie 😀
I do like to repair stuff since forever and I work as an smartphone engineer.