Re: T14s - MEC-1663 - Jtag - Pinout - Bios Password Removal
Does anyone know if this process can be done with a EZP2023+ programmer?
Dido210
Member
Last Activity: 01-25-2025, 01:17 PM
Joined: 09-23-2020
Location: San Antonio Texas
-
Re: LENOVO BIOS AUTO-PATCHER for Supervisor Password Removal
Hey guys got a T14s with supervisor password BIOS. Was able to read the bin file from Windbond W25Q128FW chip but no clue what I am looking for to edit the file with Hxd64. can anyone help with removing password?
Model is T14s Gen 1 / SN: PC-2317FY...Leave a comment:
-
Re: ThinkPad T14 Supervisor password
Hey guys got a T14s with locked bios password. Was able to read the bin file from Windbond chip but no clue what I am looking for to edit the file with Hxd64. can anyone help with removing password?
Model is T14s Gen 1 / SN: PC-2317FY...Leave a comment:
-
Re: HP Spectre X360 16-f2013dx Locked BIOS
When I enter incorrect password 3 times it just states it needs to restart with no code given. I Read the chip again and verified. attached new bin zip here...Leave a comment:
-
Re: HP Spectre X360 16-f2013dx Locked BIOS
Sure SN is CND3182NXYLeave a comment:
-
HP Spectre X360 16-f2***dx Locked BIOS
hey guys i got a locked bios on a HP Spectre X360 16-f2013dx. can anyone help me out? thanks in advance.... -
Hisense 65H8G Boot Loop
Hi i have a Hisense TV that is stuck boot looping. Tried reaching out to hisense for the firmware file but no response and its been a couple weeks. Does anyone here possibly have it? Thanks in advance for any help.
Here is the label and picture of what it shows on the screen.... -
Re: help me dell 7320-7420 PASS
Hey everyone. I have a bios locked 7420. can anyone unlock? thank you in advance.Last edited by SMDFlea; 04-10-2023, 10:54 AM.Leave a comment:
-
Imac A2116 - 820-01237-A Schematic or Board View
anyone happen to have the Schematic or Board View for this Model? -
Re: TCL 65S517 No Backlight, Picture and Sound OK
I would first test voltage on the power supply board LED connector pins. disconnect the connection I circled, if you are getting voltage while they are not connected to the board then its going to be bad LED's and would require that you open the display assembly to test. if you don't get any voltage when powering on then the fault is in the Power Supply board.
My Company works repairing TCL tv's under warranty so i have gotten lots of experience with these type of issues. my best guess would be that your LED strips...Leave a comment:
No activity results to display
Leave a comment: