Re: LG 60PV450-UA.AUSLLHR, repeat YSUS failure
They're 10 OHMS.
slidewire
Member
Last Activity: 12-02-2024, 06:29 PM
Joined: 02-20-2011
Location:
-
Re: Vizio VO47LFHDTV30A Dead Set
In mine, the same board, R908 was also open, it had "60A" on top which crosses to 412 Ohms.Leave a comment:
-
Re: LG 60PV400 display problems - Help Please
You might have purchased a dud board. Check IGBTs & Mosfets on the YSUS also.Leave a comment:
-
Re: Toshiba 46xv648u no power at all
You've got a defective resistor at R851.Leave a comment:
-
Re: Toshiba 32AV502R green blinking LED
You might try cleaning or replacing the power tactile switch and other switches at the button assembly, main board. It worked for mine.Leave a comment:
-
Re: Use DC Power Supply to Test LCD TV???
You might try cleaning or replacing the power tactile switch and other switches on the button assembly. It worked for mine.Leave a comment:
-
Re: Sony Bravia KDL 52W5150 display problem
Yes, you have a bad LCD Screen. There's a good test. Contort/flex the top right/left corners of the screen ever so slightly. If there is any change in the pix, you have a bad LCD panel.Leave a comment:
-
Re: Panasonic plasma TC-P42S30. What is killing my SN boards?
My experience has been, with Panasonic models manufactured after 2010, it doesn't always matter what the error code is, the problem is likely a shorted SC or SN board.Leave a comment:
-
Re: coby tftv4028 mainboard #002-FV40-2810-00R ver:1.0 need opinions!
You have a solarized image, usually caused by a defective T-Con boardLeave a comment:
-
Re: Samsung Syncmaster 245BW
Samsung, model# 245BW (LCD Monitor)--
Symptom: no backlight, no grid; and there is no significant bias voltage going to the inverter board.
Cure: RB805 (68 ohms; open) located on power module.Leave a comment:
No activity results to display
Leave a comment: