im using tv as monitor on factory mode for few days now, nothing catched fire or similar. the picture is damaged but tv stays on until i plug it out of socket. im bot shure what to do with pin 51. my lower lvds cable is kinda damaged it looses connection to MB when i touch it with my finger (part that goes to t-con). and since i live in serbia i cant get a replacement...

quick update, tv only works when i put factory on nvm.eed and the screen is damaged (water damage or moist idk). it doesnt want to disable the error with nvm.eed. only nvm.bin works..i guess ill keep it on factory mode and use it on hdmi as monitor...

still the same thing, nvm.bin turns the screen on, cycles for 3 times crashing on android dots and restarts the problem. ive changed the lower LVDS due to an issue with loosing connection (bad cable) but still the same thing. the mobo is new also and taken from working set (broken screen)....

quick update when i put nvm.eed on flash tv does nothing. flashes error. when i pit the same file but rename it to nvm.bin tv does flash and turn the mainboard(green leds) shows logo starts to boot and reset it self..does that 3 times and goes to error again(fast flashing red standby led) due to bad LVDS cable (lower one 51pins). waiting for the new cable to continue teouble shooting.

hello, im new here and i have some update regarding blinking red light fast not avbe to flash nvm.eed to disable error. i tried everything and didnt manage to do it. dif usbs, formats, etc. only one time did work and i did the following, disconnect from mains, discconect both lvds from t con comming from MB, put usb with nvm.eed and only then i got the green light on MB working. discconected from mains again put the lvds back in and voila screen came on. now it still going to error after 3 attempts to boot but im working on that. cheers

philips 55oled803/12