Re: I didn't think this was possible - an 'explosive' Delta!
Did anyone notice the piece of crap Elite main capacitors?
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Help! Small solder joints.
Here's the link to the new board. If you look closely at the picture in the body of the listing, you can see some Nichicon model numbers. HM, HN, HD, etc. The polymer capacitors are Sanyo's, it has a few KZG's in it, but KZG's just don't like heat. This board has 6, and it's 8 years old and they're still working. I believe that they'll be just fine. [url]http://www.ebay.com/itm/270925234344?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_6588wt_1044[/url]Re: Help! Small solder joints.<br />... board. If you
Leave a comment:
-
Re: Help! Small solder joints.
I know, but it has OST's all over the board. I found another one on eBay with Nichicon and Rubycon capacitors on it.
Leave a comment:
-
Re: Help! Small solder joints.
Found a board on eBay with all Panny's... I may buy that one, and replace the whole board.
Leave a comment:
-
Re: Help! Small solder joints.
I'm not taking it out of the case again. It's working perfect now, Prime95 will run for hours. The new capacitors seem to be working fine, as the system is perfectly stable. I'm typing this on it right now.
Leave a comment:
-
Re: Help! Small solder joints.
Desoldering wasn't a problem, soldering the new caps in was hard, the solder looks terrible on the new joints, but they do work. I've put pressure on them, the joints are secure, just not good looking, at all. The Dell Dimension 3000 I recapped from a bad Nichicon HN (2005 date code) with a Rubycon MCZ 10v 1000uF took solder really really well. I thought I killed that ASUS, it amazed me that it POST'd when I pressed the power button.
Leave a comment:
-
Re: Help! Small solder joints.
Recapped the board tonight, was a pain in the a$$, thought I killed the board, but it's booted up and playing a YouTube video as I type this. I'm never soldering on an ASUS motherboard, ever again. lol.
Leave a comment:
-
Re: Help! Small solder joints.
I've ran small FFT's on it in Prime95 for about 2 hours and 30 minutes now, still going strong.
Leave a comment:
-
Re: Help! Small solder joints.
It was an 8 piece set. No reason to, none of the other capacitors are bloated. They're OST (I know they're a bad brand, but if you keep them cool, they'll be fine), and UCC KZG (They don't like heat either, but I keep at computer pretty cool, so I won't replace the rest of the capacitors unless they bulge.
Leave a comment:
-
Re: Help! Small solder joints.
I bought them from here [url]http://myworld.ebay.com/ny-electronic-parts-os/?_trksid=p4340.l2559[/url]
They all have the same date code, 0524. The bung in all of them look the same, as well as the vent. They don't look fake to me, and I've seen a lot of MBZ's.Re: Help! Small solder joints.<br />...on't look fake
Leave a comment:
-
Re: Help! Small solder joints.
I haven't tried desoldering or soldering on it yet. I will tomorrow once I get the 45w desoldering iron. I got my Rubycon MBZ's today, I ordered 8, and I got 12! Score! Thanks eBay! And they're not Rulycon fakes either!
Leave a comment:
-
Re: Help! Small solder joints.
Looking on the Radioshack site, I found a nice desoldering iron. I've decided to buy one of those on Friday, with some 60/40 Rosin Core solder to desolder the old Ltec's and solder in the new Rubycon MBZ's.
Leave a comment:
-
Re: Help! Small solder joints.
Thanks. I'll get some 60/40 to make the joints bigger, then use the wick to remove the rest of the solder and remove the bulging Ltec's.
Leave a comment:
-
Re: Help! Small solder joints.
Can I use my 100w Weller or should I use my 45w Radioshack iron with a chisel tip?
Leave a comment:
-
Help! Small solder joints.
I have an ASUS motherboard with 2 bad capacitors, I have replacements but the joints are very small, my desoldering braid won't remove the solder. What else can I use to desolder the bad capacitors?
-
Re: HP Pavilion A850Y ASUS PTGD1-LA
Will desoldering braid work for removing solder?
Leave a comment:
-
Re: Fake Rubycon MCZ?
I saw a few Teapo capacitors with the Nichicon brand name on them, if you want to make a fake, get the color of the label and the vent right!
Leave a comment:
-
Re: Fake Rubycon MCZ?
Sucks for the 30 people who bought them!
Leave a comment:
-
Fake Rubycon MCZ?
Are these fake? Something doesn't look quite right about the font on the label, or the vent of the caps.
[url]http://www.ebay.com/itm/1000-Rubycon-6-3V-1800UF-Radial-Electrolytic-Capacitor-/180413063737?_trksid=p5197.m185&_trkparms=algo%3DSIC.NPJS%26itu%3DI%252BUA%26otn%3D12%26pmod%3D130568805380%26po%3DLVI%26ps%3D63%26clkid%3D6634161699855963307#ht_1399wt_1163[/url]
https://Are these fake? Something do...9wt_1163[/url]
-
Re: HP Pavilion A850Y ASUS PTGD1-LA
I have my 125/140w Weller solder gun, my desoldering braid, and my solder. Now to order capacitors. The motherboard is an ASUS/Pegatron PTGD1-LA.
Leave a comment:
No activity results to display
Show More
Leave a comment: