Re: Samsung LE32R88BD/ BN44-00155A

I have taken measurements with it plugged in and then switched on.
Just for reference the voltages were pretty much the same on or off.

CNM801

Pin 1 0.02
Pin 3 5.4
Pin 7 11.78 <-> 1.4 It went up and down between these two voltages
Pin 13 1.0 <-> 0.6 It went up and down between these two voltages

CNM803 had 24.4 <-> 22.1 It went up and down between these two voltages


CNM80 All 0V except DET which was 5.4

RM801 0.3 ohms...

Re: Samsung LE32R88BD/ BN44-00155A

Hi
I just received this LE32R88BD TV from freecyle and it does not turn on. The Standby light is on and when I power the TV on via the remote the led goes out. However, the TV does not turn on nor do the panel buttons work.
I have changed CM861 which had a domed top. RM801 shows 0.3 ohms
There is 5V on the PS pin of the plug.
There is however, no 5.4V, 13V or 12V. the 13V pin ramps up and down between 1.4 and 11.6V.
It would seem a capacitor is charging and discharging.
Can anybody give me a clue as to wher...