Re: Viewsonic vx910 replaced bulging caps but still have blinking green light HELP !!
i am a real newbie when it comes to fixing electronics.
can you please explain how to take the measurments and what readings i should get ?
koopa8585
New Member
Last Activity: 02-13-2011, 06:06 PM
Joined: 02-12-2011
Location:
-
Re: Viewsonic vx910 replaced bulging caps but still have blinking green light HELP !!
thanks here are some pics...Leave a comment:
-
Re: Viewsonic vx910 replaced bulging caps but still have blinking green light HELP !!
should i order a T1 and brown cap or could i get away with just buying a new set of electrolytic caps?
i have bought QUITE a few worthless parts alredy and i could have just bout a new power supply board by now i would liek to do this as cheap as possible.
Electrolytic Caps as usual
2) Failure of T1(top right on your photo)
3)Failure of brown cap next to it,C24Leave a comment:
-
Re: Viewsonic vx910 replaced bulging caps but still have blinking green light HELP !!
some more detail on the caps i used when replacing
[url]http://www.electronix.com/capacitor-low-profile-50v-470uf-p-5682.html[/url]
this is what the product description was
These electrolytic capacitors are radial lead style, 50 Volt, 470 microfarad. Low profile design for small installation areas. High quality, 105C (Celsius) temperature rated.
were those the correct caps? or do i need to order new ones ?Re: Viewsonic vx910 replaced...Leave a comment:
-
Re: Viewsonic vx910 replaced bulging caps but still have blinking green light HELP !!
The large red arrows were the bulging ones that i replaced. the small red arrow i replaced as well. i am waiting on the 2 330 caps they are in the mail.
do i have to have the same rating caps? how much can they be off ?
The caps i used were from radio shack
i replaced them with the same values
i replaced the 2 of the 470 uf 25v caps
and 1 of the 4.7 uf cap...Leave a comment:
-
Viewsonic vx910 replaced bulging caps but still have blinking green light HELP !!!!
Hi i have a veiwsonic vx910 with the blinking green light
i replaced 2 bulging caps ( 470 uf 25 v)
still had blinking green light
so i than replaced 4.7 uf cap
should i keep replacing caps????
what else coudl i do to find out the problem?
what are other common problems with the veiwsonic vx910
No activity results to display
Leave a comment: