Re: Samsung 930b LCD cold start problem (inverter?)
Well, I'm no expert on electronics. I learn quickly but I was following this thread from the start and i replaced the caps. Others mentioned the fuse being problematic so I was looking for it to test it.
I did the whole power on and check with a flash light. I see the image so something is working right. I still will take some pics if I ever get some time.. been really busy fixing computers.
I think I found the fuse under a glob of rubber stuff. I'm going to check it out and see if its tests good....
Logicsays
New Member
Last Activity: 02-22-2011, 09:55 PM
Joined: 02-11-2011
Location:
-
Re: Tech details on green fuse?
Sure.. I'll get a snapshot asap. I have a great camera so I'll post a nice big highly detailed pic. Thanks for your help....Leave a comment:
-
Re: Samsung 930b LCD cold start problem (inverter?)
The image is viewable with a flash light.. so something is working.....Leave a comment:
-
Re: Samsung 930b LCD cold start problem (inverter?)
I replaced the caps with the mentioned digikeys replacements. I'll try to the flash light trick again before the caps being replaced I had nothing. I'll update...Leave a comment:
-
Re: Tech details on green fuse?
Where is this fuse? My board looks identical to the images in post #60 Is it right next to the 3 caps in the white rubber goo?...Leave a comment:
-
Re: Samsung 930b LCD cold start problem (inverter?)
I replaced the three bulged caps.. no change. Solid green light nothing else.Leave a comment:
-
Re: Samsung 930b LCD cold start problem (inverter?)
Thanks.. I ordered them yesterday. I'll let ya know how it turns out....Leave a comment:
-
Re: Samsung 930b LCD cold start problem (inverter?)
also having a hard time locating the fuse. I viewed images of board posted and mine seems to be a bit different.. would this fuse be next to my caps? I noticed the tops of 3 caps are humped up compared to the rest of the caps.Leave a comment:
-
Re: Samsung 930b LCD cold start problem (inverter?)
I have the same monitor as mentioned in this thread. My symptoms are the green light comes on.. never blinks..just remains solid green. however if you push one of the other buttons.. menu etc.. you can see a faint flicker of light thru out the panel.. hard to see unless its dark... I guess I should start with the fuse?Leave a comment:
No activity results to display
Leave a comment: