Re: T440s bricked components near bios missing after soic8 clip sprung off
Hi managed to get the missing components onto the board with great difficulty, ended up buying a faulty board from ebay and using it as the donor for the components. I unfortunately still have an issue of black screen, green led which blinks cyclically and the fan spins on and off, any ideas what could be wrong?
I have reflashed the bios several times even with the chip of the board.
Checked the voltage at d12 with probe on ground, fluctuates to 1.2v.
Any tips would be...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: T440s bricked components near bios missing after soic8 clip sprung off
Thanks for your reply. I got 33 ohms at pin 5, it wasn't reading easily like the others had to move the probes about not sure if it faulty but did get 33 ohms
twice when the multimeter settled, so will get a 33 ohms at pin 6. Can I use a standard resistor or will I have to get a smd resistor those pads? Also where is the best place to get these components.
Leave a comment:
-
T440s bricked components near bios missing after soic8 clip sprung off
Hi
Got an issue with a Lenovo T440s that does not boot after using the Leno Patcher from
[url]https://www.badcaps.net/forum/showthread.php?t=87588[/url]
I got to the last stage of applying the original bios and the soic8 clip sprung off knocking off two components that i cannot find on board or around. The laptop does not get to the boot logo, but on powering I get a green power on light which blinks occasionally the fan spins and then stops. I have downloaded the schematics for this board and looks like the D12 (RB520CS-30GT2RA_VMN2-2) and R681 (33_0201_5%)...
-
Re: New Members - please post your introductions here
Hello All, I am a software engineer but enjoy tinkering with electronics and attempting to fix broken gadgets, usually unsuccessfully ;-) but have some wins now and again, would like to pick up knowledge from other members of the community.
Leave a comment:
No activity results to display
Show More
Leave a comment: