Re: MacBook Air 820-00165 PPBUS-G3H Short to ground

Hey!
I have solved this type of issue once before on this exact board. Pin one side of F7140 was getting the 8.6v but the pin 2 side was shorted to ground. The fuse was blown as well. I didn't have the means to inject voltage so I replaced the fuse. Once I did that the pin 1 side of the fuse became shorted to ground as well. I then plugged in the magsafe and dripped alcohol all over the board to see if anything got super hot. This is when I found C7313 sizzlin'. After replacing it, I got fanspin and the board was fully functional....