Re: Samsung Syncmaster 245BW
yes there is but then theres the silver lining also thats on the plastic. it doesnt arc on the whole plastic cover just on the upper part which i just covered with electrical tape to insulated it...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Samsung Syncmaster 245BW
The arc was causing the screen to go black so I just covered the area with electrical tape and now I don't have any problems. Not sure what is causin it...
Leave a comment:
-
Re: Samsung Syncmaster 245BW
okay i changed the "BIG" cap not sure if that didnt anything since i didnt test it without the back casing but it works now..but with one problem only with the back casing off. when i put it back on it goes back to flickering then going black.
EDIT:i See some ARC on the inverter area when i press down the the silver covering that goes on top of the inverterLast edited by antok86; 02-11-2011, 08:09 PM.
Leave a comment:
-
Re: Samsung Syncmaster 245BW
I totally with you on this. Now when you say two seconds to black does it matter how it turns to black? Mine doesn't go out to black instantly. It flickers like its struggling to turn on then goes off
Leave a comment:
-
Re: Samsung Syncmaster 245BW
okay thanks ill order some and try that. so your saying its not a psu board problem?...
Leave a comment:
-
-
Re: Samsung Syncmaster 245BW
i noticed this...not sure what it is or if something was supposed to be there. monitor was never opened...Last edited by antok86; 02-10-2011, 04:59 PM.
Leave a comment:
-
Re: Samsung Syncmaster 245BW
readings from 2k setting
t1- 1191
t2- 1185
t3- 1178
t4- 1195
t5- 1189
t6- 1190
t7- 1181
t8- 1181
t9- 1191
t10- 1187
t11- 1180
t12- 1181...Last edited by antok86; 02-10-2011, 04:41 PM.
Leave a comment:
-
Re: Samsung Syncmaster 245BW
i know...but i took out my resistors to measure and i dont know if i can put the original resistors back in. And i can get 68 ohm 1/2 watt locally
Leave a comment:
-
Re: Samsung Syncmaster 245BW
[CODE]Thanks bill I'll try to follow your instructions when I get home
Can I use 68ohm 1/5 watt resistor?[/CODE]Code:Re: Samsung Syncmaster 245BW [CODE]Thanks bill I'll try to follow your instructions when I get home Can I use 68ohm 1/5 watt resistor?[/CODE]
Leave a comment:
-
-
-
Re: Samsung Syncmaster 245BW
i took RB805, RB806, & RB807 out to measure and they all read at about 68 ohm...
Leave a comment:
-
Re: Samsung Syncmaster 245BW
okay my monitor displays real quick then goes black. i can see my computer and the OSD real quick then it goes black and the blue light stays on. i got it torn down and i dont see any bulging caps or melted resistors. what can i check next/
Leave a comment:
-
Re: Samsung Syncmaster 245BW
so after reading this...looks like majority of the problem comes either from Burnt Resistors or a bad "big" cap?
Leave a comment:
No activity results to display
Show More
Leave a comment: