Hello,
A few days ago my Dell 2408 has stopped to working without any noticeable sign.
It can be power on, power light stays green, backlight works but there is no OSD, menu input, Dell logo etc. It happens if there is some input source connected or not.
I disassembled the case but I didn't see any failures on the board. The only element that looked suspicious was L6561 - there was some brown dirt under it. So I replaced this IC but it changed nothing.
What else should I checked or is this repair even possible/worthwhile?
Thank you for your c...
Aezakmi
Member
Last Activity: 01-30-2024, 12:26 AM
Joined: 05-31-2020
Location: Toruń
-
-
Re: Dell 2408: standby mode, orange light
Yesterday I heated up heatsink on the second motherboard and monitor turned on. After cooling it down, it came to the previous status.
So unfortunately, BGA chip is somehow broken.
Maybe I will follow the workaround described here: [url]https://www.badcaps.net/forum/showpost.php?p=827355&postcount=76[/url]Re: Dell 2408: standby mode, orange ...unfortunately, -
Dell 2408: standby mode, orange light
Hello Everyone,
Last week, my Dell 2408 stopped to working. Now the only sign is turned orange led light. Pressing on it and any other buttons doesn't change anything. There isn't also any picture on the screen.
It happened several times lately and solution was to unplug the power cable.
Additionaly, when I turned the monitor on after e.g. whole night, there was one vertical line in the middle of screen, which disappered after 2-3 minutes.
What I have alredy done:
I changed the capacitors (8 in total) and KA431 on the middle PCB but without any... -
Re: New Members - please post your introductions here
Hello!
I have found this forum during searching for my problem with Dell 2408.
I hope that finally I get answer here.
Cheers!Leave a comment:
No activity results to display
Leave a comment: