Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Already stuck back in vehicle waiting on relay for it. It’s a fuse block out of a Silverado, only things on board are a bunch of fuse terminal and 5 or 6 relays soldered on.
-
Soldering help.
I am at my wits end trying to get these 2 hole clear. The other 2 holes no problem. I tried low melt, hot air, wick and my solder sucker gun. One hole still has the pin in it. I have my iron up to 450 with a big tip, hot air turned up to 500. Any suggestion? Thanks Michael
And by the way it took me 10 minutes to find the login button, it sure needs to be a brighter color or something.
-
Insignia NS-24E400NA14
Replacing backlight with a universal one, how can I trick the board to turn on without back light installed. I was going to power the driver board for the new backlights off the original backlight output. it has 6 pins and the readings I am getting as is:
1) 4.47v
2) 4.47v
3) jumps to 30 and comes back to 18v
4) jumps to 30 and comes back to 18v
5) 4.47v
6) 4.47v
The universal set takes 9-30v input so I use the 2 center wires to the input of the driver
-
Insignia NS-24E400NA14 Backlight
I use 3 of these as security camera monitors and they all have blue tint to them now. I was expecting to find the normal led strips but it looks like a standard laptop type screen. Would it be worth trying to replace the backlight or not? Thanks Michael
-
Sony STR-DH550 No Hdmi Output
Got home today and receiver has no hdmi output, inputs are there but no audio or video out to tv. Done all the connections trouble shooting. By pass receiver everything works as it should. I do plan on opening up and peeking around but was hoping somebody had seen this failure before. Thanks Michael
-
Fire TV Recast
Has anybody hacked into these yet since amazon has discontinued them. I am so tired of seeing the low signal strength. Thanks Michael
-
Extending the antennas on router.
My router has 4 antennas, could I run some rg6 with BNC connectors and put the antenna say 30 feet away to get better coverage through my home? Thanks
-
Re: Samsung UN65KU7000
Yeah this pic shows it better, looks like a few on bottom out....
Leave a comment:
-
samsung un65KU7700
Does anybody know if its edge lite, could it be some leds going out?
Leave a comment:
-
Samsung UN65KU7000
Vertical line in screen that comes and goes right now. Is it worth tearing into or does it look like a tab problem? Thanks...
-
Re: Led backlight universal board
Any idea what a 10 led strip should pull in amps?/
Leave a comment:
-
Led backlight universal board
I ordered one of these off Aliexpress but haven't been able to get it to work correctly. I am feeding it with 24 volts from main board and it seems to be just passing the 24v to output. I am trying to replace some ccfl with led strips. Any ideas what I am doing wrong. I have tried this one. Ca-266. [url]https://www.aliexpress.com/item/32974742847.html?spm=a2g0o.productlist.0.0.5670bb2axZqu5A&algo_pvid=08da4a44-2db0-47e8-a09f-6c4a25c43f8d&algo_exp_id=08da4a44-2db0-47e8-a09f-6c4a25c43f8d-3[/url]
Thanks Michaelhttps://I ordered one of these off A...able to get it
-
Connector identification help
Not sure what to search on these 2 connectors/ headers. It does have a 2.00mm pitch. Thanks...
-
Re: Vizio V705-G1 Flickering
Well reseated some cables and moved the backlight cable around some and it seems to be working fine now. I did order a backlight cable to replace that one and when I pull the screen will check all leds at that time.
Leave a comment:
-
Re: Vizio V705-G1 Flickering
I dont see a standby termnal, would it be named something else on this board?...
Leave a comment:
-
Re: Vizio V705-G1 Flickering
Must of the plugs are dual rows, I guess it’s best to check from the back? Since I cut the loom open it now just starts up and turns back off in about 3 seconds. Looks like I need to remove screen to see the rest of that harness.
Leave a comment:
-
Vizio V705-G1 Flickering
Just picked this one up, the screen flickers as in this video. I will take some measurement tomorrow. Thought somebody might have seen this one before. It kinda looks like some arcing by where the backlight wires go through to the front. I cut the loom open as far as I can get but don't see anything obvious. Here is link to screen flickering. [url]https://youtu.be/cJRi7v0ypn8[/url]https://Just picked this one up, the...light wires go...
-
Re: Phillips 48in
End up just recouping my money to some one that can appreciate it. Now on the search for another project. Thanks for the help as always....
Leave a comment:
-
Total board swap
Ok so I got this Chinese tv from the other thread, does any know if I could just swap a complete set of board and just basically use the panel. Any body have a set with a broke screen that would make me a deal to give this a go. Does it need to be from a certain size screen.
-
Re: Phillips 48in
I guess if I want to watch Asian shows I am all set, could I flash it to English software?...
Leave a comment:
No activity results to display
Show More
Leave a comment: