Re: Westinghouse L2410NM 24" LCD power goes on and off, blue light flickers

Okay I put the new caps in and plugged it all back together and the monitor works again. Thanks for all the help guys.

Re: Westinghouse L2410NM 24" LCD power goes on and off, blue light flickers

The caps on my board are

1 2200uF 10V
2 680uF 35V
1 1500uF 16V
2 1000uF 25V
1 100uF 25V

This kit matches that.

[url]http://lcdalternatives.auctivacommerce.com/Repair-Kit-Westinghouse-L2410N-LCD-Monitor-Capacitors-P1660216.aspx[/url]

Would that be okay to get or should I look for something else?Re: Westinghouse L2410NM 24" LCD pow...n my board are

Re: Westinghouse L2410NM 24" LCD power goes on and off, blue light flickers



Oh I got the monitor open just fine and I can solder things.



It is one of a set of 4 monitors so I can use the other 3 for now I would just prefer not to get a new one if I don't have to.

It is hard to find a good PVA panel and I really like them for programming work.
When I did some experiements with TN panels I found that did not work very well with strange color shifting from top to bottom and side to side that I found distrating....

Re: Westinghouse L2410NM 24" LCD power goes on and off, blue light flickers

I have the same monitor and it has just failed also. Yesterday it started to make a high pitched whine so I turned it off. By high pitched whine I mean it had such a high pitch that nobody else around could even hear it but it went off when I turned the power off so it clearly was coming from the monitor and that is where I heard it from. When I tried to turn it on today it would not turn on at all. The power light flickered very briefly on and that is it.

Is it likely that the caps have...