Re: How to flip image on vestel tv?

Sorry i was kind of rushing earlier due to low device battery.


I have a smashed 32" bush smart vestel with a VES315WNDA 2D N12 PANEL.

After I fitted a panel with same physical connections etc, from a non smart bush tv with VES315WNDA 2D N04 printed on the chassis sticker, the image has flipped vertically.
I'm trying to correct this.

My good panel (2D N04) came from a tv with an MB82S board (
The patient tv has a MB110P (corrected from first post)

So the current...

Hi all, I've done lots of searching regarding this but I'm only seeing incomplete information.

Basically I have swapped the panel from a non smart 32 Bush VES315WNDA 2D N04 into a smart BUSH TV with originally a VES315WNDA 2D N12.

This results in a flipped image.

How can I correct this?

Is it a case of downloading the 2D N04 profile from the original tv and uploading to my donor via USB. My original mainboard is an MB82s, new mainboard is an MB130.

Help?

Re: Eeprom dump thread!

Good evening everybody, does anyone have a copy of the firmware for the below model.

Model: Luxor lux0155005/01
Board: 17MB130P
Panel: VES550QNDA 2D N11

Many thanks from a long time lurker.