Hi Techies
Has anyone got a board view for this laptop. I have the schematic for this just need the board view. Its a dead laptop Cheers
tintin007
Member
Last Activity: 09-11-2023, 05:44 AM
Joined: 05-10-2020
Location: wellington
-
Dell Inspiron 1521 Boardview
-
Re: MacBook Pro A1278
Hi,
I have a resolution. I found some corrosion on pin 2 of r5054, Replaced r5054 as it was open. also cleaned corrosion around pin 2. Macbook now runs happily. Looks like this goes to a bi line on the CPU_PECI. Cheers for your advice -
Re: ASD needed
photo to show locked dmg file, wonder if i should just erase the disc and install os again? . would an upgrade to a newer os give this issue ? Tried other resolutions with no luck...Leave a comment:
-
ASD needed
Hi,
I need to download ASD 3s150 or 3s155 to test a MacBook Pro. could someone send me a download location Please.
I got the file but one of the segments has a password.
Thanks -
Re: MacBook Pro A1278
Hi Stratos, Battery is ok. charges up to full capacity, according to display. using mac charger and led changes from amber to green. I tried the other you tube fix before posting, It didn't make any difference at all. Hence why i think its a hardware issue. Its a mid 2012 from what i understandLeave a comment:
-
Re: MacBook Pro A1278
yes pretty much that. loud fan, very sluggish, kernel task 200+%, took a long long time to re install OSLeave a comment:
-
MacBook Pro A1278
Hi,
I have the right boardview and schematics from this site, Pretty sure i have a sensor issue. Could someone share the ASD 3s155 with me so i can run the tests ?? Prefer .rar format. Cheers -
Re: MacBook Pro A1278
changed post to new thread in another locationLeave a comment:
-
MacBook Pro A1278
Hi,
I have the right boardview and schematics from this site, Pretty sure i have a sensor issue. Could someone share the ASD 3s155 with me so i can run the test ?? Cheers
-
Re: New Members - please post your introductions here
Hello, Was a tv tech for many years. moved on, brought here through a friend giving me a macbook to look atLeave a comment:
-
Re: New Members - please post your introductions here
Hi,
First post. mark here from NZ. been involved in electronics for ages been given a mac book to look at and came across this forum.. started out with tvs vcr back in the eighties...
look forward to using/browsing site.Leave a comment:
No activity results to display
Leave a comment: