Hey i need a working BIOS dump for a Toshiba Satellite L50-B-2G7.
I dont know if it matters, but the name of the motherboard is DABLIDMB8E0 REV:E.
Thanks in advance.
cheers
edit: nvm, found it by myself. I'll attach it for future requests....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Toshiba Satellite L50-B-2G7 BIOS needed.
Last edited by notorius; 03-18-2020, 08:00 PM.
-
Re: Toshiba Satellite L50-B-2G7 doesnt save BIOS Settings / reverts always to default
thanks man. A good Link....
-
Re: Toshiba Satellite L50-B-2G7 doesnt save BIOS Settings / reverts always to default
that means ?...
Leave a comment:
-
Re: Toshiba Satellite L50-B-2G7 doesnt save BIOS Settings / reverts always to default
sure, tried ofc all of em....
Leave a comment:
-
Re: Toshiba Satellite L50-B-2G7 doesnt save BIOS Settings / reverts always to default
Done that. Didnt worked. Win10 on Rufus with GPT/UEFI
I tried it with Quickboot (F12) and picked the USB-Stick directly -> no media found. restart the system.
Problem is not the media, but the BIOS itself. Its kinda broken....
Leave a comment:
-
Re: Toshiba Satellite L50-B-2G7 doesnt save BIOS Settings / reverts always to default
Even on a original Win8 DVD ?...
Leave a comment:
-
Re: Toshiba Satellite L50-B-2G7 doesnt save BIOS Settings / reverts always to default
Apparently there is no way to use any Media to boot from.
Tried UEFI / CSM bootable Sticks. Win8 DVD , Pre-Installed SSD with Windows 10.
None of them are booting, the Screeen shows ( no bootable device please restart system )...
Leave a comment:
-
Toshiba Satellite L50-B-2G7 doesnt save BIOS Settings / reverts always to default
Hey guys, im new here and i have a problem.
I bought the above mentioned Laptop without a Harddrive.
I put in a SSD and wanted to install Windows but i cant boot neither from
USB-Stick nor from the build-in DVD-Drive.
So i went into the BIOS and changed the boot sequence. But then, after
saving the settings (+reboot) i checked BIOS again and still had the old default settings loaded.
I also needed to have the CSM-Mode instead of UEFI for proper Installation, so i changed it , and guess what - after the "Save and Exit"...
-
No activity results to display
Show More
Leave a comment: