Re: Reebok GT40s Treadmill power supply issue?

I connected the multi-meter to the negative and positive wires of the motor and ran on the treadmill. I got a voltage reading from the motor. The faster the motor turned the voltage reading increased.

It looks like the motor is good then...the board must be faulty.

Any thoughts?

Re: Reebok GT40s Treadmill power supply issue?

I have line voltage across AC1 & AC2 so there is power going into the board. The motor installed in this treadmill is 180V, I don't any reading from the motor terminals M- & M+. Does that mean the board is at fault?

Is there a way to test the motor?

Re: Reebok GT40s Treadmill power supply issue?

Hi All,

I have got the same treadmill (Reebok GT40s) but I have a different problem. My partner was using the treadmill but then the treadmill powered off. When I came in the room, I immediately smelled that electric component burning type of smell coming from the treadmill. I removed the power and let the treadmill rest for a while.

I powered it up after about an hour, the treadmill powers up, I could see 0:00 on the display but then it showed E2. The treadmill then starts to make a beeping sound every...