Re: Samsung led strips not working
I would like to know if I can jump start the power supply to confirm that it will send the correct voltages to turn on the LEDs and thus confirm that the problem is on the main board. There are 10 pins in the power supply and I don't know which ones to jump to force it to start.
andrejack
New Member
Last Activity: 04-17-2020, 07:55 PM
Joined: 02-10-2020
Location: Toronto
-
Re: Samsung led strips not working
Samsung TV UN50H5203AF
Power Supply BN44-00772A
When I turn on the TV the red standby led is flashing and does not turn on the LEDs. I removed the cable from the main board and turned on the TV again but the Leds did not light up. I connected an external source to the LED cable and they lit up. I would like to make a jump in the power supply to see if the Leds turn on and confirm if the defect is in the main board or in the power supply.Leave a comment:
-
Re: Samsung led strips not working
The LED strips are not working. The power supply is BN44-00772A. I would like to know how to connect the power source without the main board connected to be able to test the led strips. I couldn't find the electric scheme of this power supply.Leave a comment:
No activity results to display
Leave a comment: