Re: Can i test MLCC caps with multimeter?
Also i changed the tcon with no change
Gasvan
Member
Last Activity: 03-30-2020, 04:47 PM
Joined: 02-08-2020
Location: Ontario
-
Re: Can i test MLCC caps with multimeter?
Also bud this is my original post that i bumped three times with no replies my bad for opening other threads [url]https://www.badcaps.net/forum/showthread.php?t=82502[/url]Re: Can i test MLCC caps with multim...?t=82502[/url]Leave a comment:
-
Re: Can i test MLCC caps with multimeter?
Its a samsung un60f7100 this is what my screen looks like when hooked up to hdmi every thing is red and laggy faded...Leave a comment:
-
Re: Can i test MLCC caps with multimeter?
Hi everyone been testing the caps on the board between lcd and tcon board at 200k all measure around 200k almost but 2 of them that are close to the ribbon cable near tcon only measuring 2.2k the small one i circled on the right and the one circled on the left. Weird thing is that when i disconnect the ribbons coming from the tcon there values start going up to 200k like the others. What can be the problem?...Leave a comment:
-
Re: How to test tiny black resisters on lcd panel board
When i plug in a video source to the hdmi the picture is gean red and laggy like overlapping. I ordered a tcon board put in in with no change.Leave a comment:
-
Re: Can i test MLCC caps with multimeter?
Okay ty for the feedback very appreciatedLeave a comment:
-
Re: Can i test MLCC caps with multimeter?
Ty stj.. i have tested some that start at -13 ohms then start climbing to 500 900 ohms that normalLeave a comment:
-
Re: How to test tiny black resisters on lcd panel board
I tested all the caps non are shorted out although when i tested some caps in ohms some started reading in the negative then slowly went up to over 150 ohms is that bad.Last edited by Gasvan; 02-14-2020, 10:29 PM.Leave a comment:
-
Re: How to test tiny black resisters on lcd panel board
Ty but What could be the cause of this problem i have...Leave a comment:
-
How to test tiny black resisters on lcd panel board
Just wondering if i should be looking for continuity here is a pic of what im talking about... -
Re: Samsung UN60F7100AF blue screen no image with sound
Can any one take a look at the last pictures of my display im thinking the lcd panel is shot. Or might still be the tcon? Any feedback is appretiatedLast edited by Gasvan; 02-09-2020, 01:53 PM.Leave a comment:
-
Re: Samsung UN60F7100AF blue screen no image with sound
Hi the tv has some kind of image now fades in and out and only in red...Last edited by Gasvan; 02-08-2020, 09:22 PM.Leave a comment:
-
Re: Samsung UN60F7100AF blue screen no image with sound
Do i test the caps on the panel board in diode mode to see if there is a short...Last edited by Gasvan; 02-08-2020, 05:40 PM.Leave a comment:
-
Re: Samsung UN60F7100AF blue screen no image with sound
Hi ty i just took it apart again and tested the fuse its getting 12.2 volts at both endsLeave a comment:
-
Samsung UN60F7100AF blue screen no image with sound
Hi i am new here and just wanted to get some feedback from the pros. Have a samsung here with no image but has sound with blue screen. I guessing its the tcon board its getting 12 volts. I unplugged the left side of ribbin cable from tcon to panel and left side of panel goes white right stays blue.then did same on right side with right side going white and left stays blue. Any help would be appretiated. Only thing i havent tried is testing the fuse on tcon board. -
Re: New Members - please post your introductions here
Hi im kinda new to repairing tvs and seen there is alot of nolligable people on here. Basicly im here to learn and be part of the comunity tyLeave a comment:
No activity results to display
Leave a comment: