antibotan
Member
Last Activity: Yesterday, 02:15 PM
Joined: 02-03-2020
Location: Kiev
-
Measure who is what voltage with the connected type-c at this point...
-
Here are my measurements...
Leave a comment:
-
with or without battery, it doesn't raise 19v, battery starts it up...Leave a comment:
-
I changed 65994 several times, tried different ones, the voltage coming to it is 5v, 3.3v, 1.5v, but 19v never rises, the laptop turns on from the battery...Leave a comment:
-
Maybe someone has a scheme for a board or at least a similar one? I would be very gratefulLeave a comment:
-
no!
La-m401p...Leave a comment:
-
I repeat, it turns on from the battery, and so there is no short circuit anywhere elseLeave a comment:
-
Dell latitude 5440 does not turn on after a short 5v
La-m401p
The board after a short circuit of 5v, everything was done and replaced the faulty components, the duty voltage rose, the board turned on from the battery, but the power supply does not see, or rather from 5 yuv does not raise to 20v
t was replaced by tps65994, but it did not lead to a positive result, I did not find any schemes for this board, maybe someone has already encountered such a malfunction... -
great, thank you very much, everything worked out...Leave a comment:
-
unfortunately the file does not open...Leave a comment:
-
thank you, it helped a lot...Leave a comment:
-
Thank you, I’ll try, maybe someone has a photo of this area, or there are torn elements...Leave a comment:
-
Asus X571LI filled in, need a piece of diagram or photo of the area
daxktdmb8c0
Maybe someone has a photo of a section of the board, otherwise there are no diagrams or boardview... -
Maybe someone will be able to make a dump from the update, otherwise it doesn’t work for me?...Leave a comment:
-
I flashed it with your dump, but the password remains the same...Leave a comment:
-
Getac F110
s/n: RH903F2338...Leave a comment:
-
Sorry, I formulated the request incorrectly, remove the password from the BIOS...Leave a comment:
-
help me clear my password please...Leave a comment:
-
The one on top is 0 Ohm, I tried it, it doesn’t start the matrix...Leave a comment:
-
Leave a comment:
No activity results to display
Leave a comment: