Re: Philips 32PHH4509/88 not responding to remote/not turning OFF

backlight ON has 3.3V i will open the panel to see what is there . thanks a lot

Re: Philips 32PHH4509/88 not responding to remote/not turning OFF

i have replaced the caps (220uf 50v) from the output of the power for the backlight and the controller(PF7903BS ) for the backlight and it has the same problem i have attached the photo of the psu board. the voltages are ok yet i got no voltage output for the backlight....

Re: Philips 32PHH4509/88 not responding to remote/not turning OFF

Hi. i have a situation similar but got no backlight. i powered the backlight from another power source and runned the tanya file. now i can use the remote. after i connected back the power from tv for the backlight and is not powering it. the caps look good. it blinks once when powering on the tv. the blink moment the tv is showing startup logo. what can be the problem with the backlight ? should i force update again but with the backlight connected to the tv board?