Re: KD-60X690E 2 Blinks
I got a main board from ebay fixed the problem nothing wrong with the power board
petersanchen
New Member
Last Activity: 12-09-2024, 01:56 AM
Joined: 01-22-2020
Location: oakland
-
Re: KD-60X690E 2 Blinks
the cn300 is control by q301 on the ground side i dont have gate volt on q301 118v is low I will check on that supply tonight. i need schematic. do you know where can i buy or download it.Leave a comment:
-
Re: KD-60X690E 2 Blinks
i have 118dc on my meter. but nothing on cn300Leave a comment:
-
Re: KD-60X690E 2 Blinks
Hi dick_barton Thank You for the quick reply. I have 5 volts standby on Cn201. Everything else did not have voltage; even the Acd on the set. I bypassed standby votage to Ps on and T/con on and Bl on with jumper wirers. Then I got 12 volts on T con Cn200 and all the 12 volt on Cn201. No voltage on Cn300 for back light and I have power on C306, C304 and C303 CAP. So what should be the volatage on ACd?Leave a comment:
-
Re: KD-60X690E 2 Blinks
HI I have the same problem with 2 blinks on model KD-60X690E. Does anyone have the power board schematic. no power to black light led. led okLeave a comment:
No activity results to display
Leave a comment: