Re: Samsung ue49k6300ak
1) Got it off of ebay.
2) Everything connected, TV off, not plugged in, black lead on a screw on the side of the board. The resistance in the 2k ohm range for HAVDD is 1.767, AVDD 1.648, 1.1V .216, 2.5V .590, 3.3V .478, F1 1.903 on both sides, in the 200k range VON up to 105 then down to 95.5, 2M range VSS .546
PedroBorges9
New Member
Last Activity: 02-09-2020, 02:41 PM
Joined: 01-19-2020
Location: Leeds
-
Re: Samsung ue49k6300ak
What do you suggest then, should I measure the voltages on the PSU?Leave a comment:
-
Re: Samsung ue49k6300ak
This is with the new one. The old one was the same I think. Which voltages are missing?Leave a comment:
-
Re: Samsung ue49k6300ak
Reporting back.
point - Ribbons Connected - Ribbons Disconnected
1.1v - 1.1v - 1.1v
2.5v - 2.5v - 2.5v
3.3v - 3.3v - 3.3v
AVDD- 167.5mv - ~167.5
HAVDD- 0 - 0
VON - 177.6mv - 200mv
VSS - 100 -> 55mv - 100 -> 33.9mvLeave a comment:
-
Re: Samsung ue49k6300ak
Sorry the F1 is reading 12,74 on both sides with both bottom flatcables disconnected or connected it does't matter.Leave a comment:
-
Re: Samsung ue49k6300ak
Got a new t-con board to no avail. I noticed that if I unlock and wiggle the flatcable on the motherboardside I can see a bit of the bottom of the display with an arrow pointing down and all.Leave a comment:
-
Re: Samsung ue49k6300ak
Yes I'm getting voltage of the f1, about 15v on each side.Leave a comment:
-
Re: Samsung ue49k6300ak
Hi guys, I just got a tv with the same problem. My HAVDD point does not have any voltage with the tv on, is that normal?Leave a comment:
No activity results to display
Leave a comment: