Re: HP8460p Product Information Not Valid
i've loaded your latest bios , and under bios information, my DMI info still remains . All seems correct except system config id (A0001D02), but sounds not important.
tlfrance
Member
Last Activity: 11-02-2023, 01:12 PM
Joined: 01-17-2020
Location: paris
-
Re: HP8460p Product Information Not Valid
Strange, I've already updated my dmi info and my last bios update contains them.
Anyway, possible workaround is to update your bios you provided to me with my system configuration ID (A0001C02), and I'll re change my dmi after....Leave a comment:
-
Re: HP8460p Product Information Not Valid
I send you big thanks both Claudiomfa & imranromi for your excellent help & support !
Leave a comment:
-
Re: HP8460p Product Information Not Valid
Ok. here we are :...Leave a comment:
-
Re: HP8460p Product Information Not Valid
Thanks, it works. I was able to change my DMI info: serials/SKU/CT with nbdmifit . I just can't update my system configuration ID (mine is A0001C02) because of MPM Lock (and can't unlock). But i suppose it is not important.
...
Leave a comment:
-
Re: HP8460p Product Information Not Valid
Thanks Claudiomfa. Unfortunately, nothing change with this bios. Still have DMI errors with blank serials/sku, etc......Leave a comment:
-
Re: HP8460p Product Information Not Valid
With this bios, nothing on the screen, only wifi/audio/power led are on....Leave a comment:
-
Re: HP8460p Product Information Not Valid
Thanks imranromi . No DMI errors now.
But it's not my DMI numbers. Is it possible you provide me a bios with my DMI numbers inside ? (tryed to change with nbdmifit.bat but have sku write error)
Thank you...Last edited by tlfrance; 03-21-2020, 12:21 PM.Leave a comment:
-
Re: HP8460p Product Information Not Valid
Thank you !
Here my bios dump with all infos numbers...Leave a comment:
-
HP8460p Product Information Not Valid
Hello,
On my elitebook 8460p, the sku / serial / CT .... numbers has get out of the bios. Don't know the reason . I've tryed many nbdmifit tool version from 1st page (HPSETxxx) of this thread without any luck. When i run the correct dmitool, i enter correct values from the laptop, then display the changes ans the end , but no changes seen from screen remains.
Tryed BCU tool, no output errors , but no changes remained . Updating bios version didn't help.
Anyone have already seen this issue?
I've done a bios dump with my programmer , but i'm not... -
Re: HP DMI Tool NBDmiFit
Hello,
On my elitebook 8460p, the sku / serial / CT .... numbers has get out of the bios. Don't know the reason . I've tryed many nbdmifit tool version from 1st page (HPSETxxx) of this thread without any luck. When i run the correct dmitool, i enter correct values from the laptop, then display the changes ans the end , but no changes seen from screen remains.
Anyone have already seen this issue?
I've done a bios dump with my programmer , but i'm not confident how to update this binary .
Thanks for helpLeave a comment:
-
Re: HP BIOS unlock tool
Hello,
I've successfull removed bios pwd on my 840 G3 with your utility and CH341A programmer. I've soldered 8 wires around bios chip and did the jobLeave a comment:
-
Re: HP BIOS unlock tool
I'll buy this [url]https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.fr%2Fulk%2Fitm%2F153306934960[/url]
Hope it will work for my 840 g3 biosRe: HP BIOS unlock tool<br /> <br /...my 840 g3 biosRe: HP BIOS unlock tool
I'll buy this [url]https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.fr%2Fulk%2Fitm%2F153306934960[/url]...Leave a comment:
-
Re: HP BIOS unlock tool
Hello. I guess it is the chip with the orange dot on the left on your picture...Leave a comment:
-
Re: HP BIOS unlock tool
Thanks for help. I saw 2 different ch341a programmers (black pcb and green pcb) . Difference seems around voltage (5v for black , 3,3 v for green). Which one should I take?...Leave a comment:
-
Re: HP BIOS unlock tool
Hello,
I would like to remove bios pwd on my 840 g3 . It’s wson8 chip and have gold plated contacts near the bios chip (mx25L12873F).
1/ Is ch341a programmer is compatible for dumping / writing the chip?
2/ Is it possible to do that without desoldering the chip and solder wires directly on the contacts near it?
Thanks for helpLeave a comment:
-
Re: New Members - please post your introductions here
I’ve issues on my account profile. I have no permission to edit my profile, edit options and so on. @Topcat : I.ve sended you e-mail , hope you have received it since my send items still emptyLeave a comment:
-
Re: New Members - please post your introductions here
Hello guysLeave a comment:
No activity results to display
Leave a comment: