Hi,
I´m looking for a Bios dump for a LG 24BK750Y-B
19v, 3,3v, 5v 1,1v present, Monitor starts, OSD present....just no picture on any input.
Regi
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Bios Dump for LG 24BK750Y-B
-
Medion Chromebook S2015
i need bios dump for this Chromebook: Medion S2015
MSN: 30020615 / MD 60000
Thanks
-
Re: bios dump elitebook 840 g3
Thank you
worked straight away, you are my hero
-
Re: bios dump elitebook 840 g3
Hi all,
can somebody remove the password from my HP Elitebook 840 G3 Bios?
Main Bios Dump:
[ATTACH]278941[/ATTACH]Last edited by SMDFlea; 04-02-2023, 12:22 PM.
Leave a comment:
-
-
Huawei ALE-L21 (P8) missing parts
Hi all
I got this Phone where somebody attempted to replace the battery,
he broke/lost these two parts. Can anybody help me and know the values?
[ATTACH]277518[/ATTACH]
they are near the nfc connector
ThanksHi all
I got this Phone where somebody attempted to replace the battery,
he broke/lost these two parts. Can anybody help me and know the values?
[ATTACH]277518[/ATTACH]
they are near the nfc connector
Thanks...
-
need bios dump acer aspire 7739g
Hi all,
laptop fell off table and display broke.
switches on and tried to attach external monitor but no picture.
think it might be bios problem, would like to programm it with a working dump.
Board is a AIC70 Rev 2.0
Thanks
Leave a comment:
-
HP 250 G5/BDL50 LA-D704P Rev 4.0 Water damage
Hi
I have this notebook with liquid damage (see picture).
After cleaning the marked areas notebook turns on when pressing the power button and the fan spins for about 8 seconds and stops then, but the display does not come on.
The battery charges when it is attached (LED turns orange), but won´t start from battery.
When on these coils have:
PL202 = 16,81v
PL602 = 1,021v
PL1206 = 0v
PL1205 = 0v
PL1203 = 0v
PL11 = 1,209v
PL9 = 3,385v
PL8 = 5,08v
I only have...Last edited by regi; 09-05-2021, 04:53 AM.
-
Re: Lenovo E590 no boot
i have a ch341a black edition, with this programmer i wrote the bios as mentioned in my first post but at boot it wanted a password which was never set. the programmer seems to work.......i think
Leave a comment:
-
Re: Lenovo E590 no boot
ok, that doesn´t work.
when i power on i get no picture, only a sound with changing frequencies and thats it.
forgotten: with back cover on and off
Leave a comment:
-
Re: Lenovo E590 no boot
ok, i´ll give it a try this afternoon.
thank you very much
Leave a comment:
-
Re: Lenovo E590 no boot
thank you so much
here ist the file...
Leave a comment:
-
Re: Lenovo E590 no boot
nobody here who has an idea how to fix the bios?
Leave a comment:
-
Lenovo E590 no boot
Hi all.
i need some help.
My Boss gave me a brand new never used Lenovo E590 that was lying around for a year or 2.
I unboxed it and it won´t boot, the power led flashes a few times and then it switches off.
I opened the laptop, disconnected the battery and the bios battery, shorted the pins of bios battery and put all together again.....still no boot.
The notebook is out of warranty and so i flashed the bios with the dump from another E590. Laptop now boots but shows error message:
0271: Check Date and...
-
Re: Medion E6416/MD99540 Mainboard D15D REV:2.1
Thank you so much
I´ll give it a try and report how it goes
Leave a comment:
-
Re: Medion E6416/MD99540 Mainboard D15D REV:2.1
Hi,
no you don´t have to unsolder. the values of each resistor should be enough
Thanks alot
Leave a comment:
-
Re: Medion E6416/MD99540 Mainboard D15D REV:2.1
first of all thank you for responding.
it might not be clear enough on the picture but the resistors 3 on the right side and resistors 4 and 5 on the top are all connected to pin 5 ACOK, the bottom of resistor 4 is connected to ground and the bottom of resistor 5 goes to pin 16 REGN.
The left side of resistor 6 goes to pin 1 of a K72 (small signal mosfet)
i have searched for a similar layout but found nothing near it.
i swapped resistor 6 to get 2,6v so i don´t need the value of resistor 6 anymore....
Leave a comment:
-
Medion E6416/MD99540 Mainboard D15D REV:2.1
Hi all,
somebody replaced the charging chip BQ25A, whilst soldering the resistors 1 to 6 became loose and he isn´t sure they are all in the right place.
as i can´t find a schematic i am hoping somebody can measure the correct values.
The board is a D15D REV:2.1
[ATTACH]224784[/ATTACH]
Thanks for any helpHi all,
somebody replaced the charging chip BQ25A, whilst soldering the resistors 1 to 6 became loose and he isn´t sure they are all in the right place.
as i can´t find a schematic i am hoping...
-
Re: Medion MD99090/E6234 need bios 5.06 dump
sucess
i took the first one, bios506new ME CLEAN
worked straight away, thank you so much
Leave a comment:
-
Re: Medion MD99090/E6234 need bios 5.06 dump
it starts with the old 5.03 bios
Leave a comment:
No activity results to display
Show More
Leave a comment: