Re: mouse pad problem
check connections, then replace mousepad.
obmar
Member
Last Activity: 08-01-2015, 02:09 PM
Joined: 01-02-2011
Location: USA
-
Re: Disassembly Toshiba C850
You must find all the top and bottom screws which are usually visible. Then the top cover will pop off. Link below is for an earlier model, but should be close.
What is warranty status?
[url]http://www.irisvista.com/tech/laptops/Toshiba-Satellite-C650-C655/disassemble-toshiba-laptop-2.htm[/url]Re: Disassembly Toshiba C850<br /> ...at is warrantyLeave a comment:
-
Re: AOpen AX4BS Pro
Thank you for the suggestions.Leave a comment:
-
AOpen AX4BS Pro
I need suggestions for replacement of a 1500uf 6.3v cap which is larger in diameter than the other similar caps on the board. Perhaps one of the polymers would work?...Last edited by obmar; 11-28-2012, 10:23 AM. -
Re: HP Compaq Nx9010 cooling problem
Thanks for the info.
Leave a comment:
-
Re: HP Compaq Nx9010 cooling problem
Thanks for the info. I am familiar with dust removal and heatsink compound. Can the pad for the video card be reused? What is a good brand of and specifications for heatsink compound for laptops?Leave a comment:
-
HP Compaq Nx9010 cooling problem
This laptop will boot up, but shut down when entering windows. There was basically no paste between the cpu and the heatsink. There is a pad with this same heatsink for the video chip. What is the best replacement for the cpu paste and pad for video chip?... -
Optiplex GX270 recap
I am happy to report my first successful recap of a motherboard. Thanks for all the information on this forum. -
Re: New Members - please post your introductions here
Obmar-(Rambo backwards sice it was taken) repair computers and experienced Dell Optiplex badcap fiasco. Hello to everybodyLeave a comment:
No activity results to display
Leave a comment: