Re: Infinity HPS-1000 15" Powered Subwoofer Troubleshooting Help
I mistyped. I replaced C4 and C6. The replacements are 22 µf 100v. Replacements were performed by a friend who is more adapt with a soldering iron than I am. He also measured the old caps: old C6 tested at 20.6 and C4 at 21.7. Since they were within spec (20%), he did not have a high confidence level that what he did would rectify the problem.
vkhong
New Member
Last Activity: 03-07-2020, 02:38 PM
Joined: 12-23-2019
Location: Ocala FL
-
Re: Infinity HPS-1000 15" Powered Subwoofer Troubleshooting Help
I replaced the C4 and C5 2.2 µf 50v caps with 2.2 µf 100v, which was what my local electronic store has in stock. It won't power up
Leave a comment:
-
Re: Infinity HPS-1000 15" Powered Subwoofer Troubleshooting Help
I see them plainly now. Thank you for pointing them out! Will post result after re-capping....Leave a comment:
-
Re: Infinity HPS-1000 15" Powered Subwoofer Troubleshooting Help
Yes, made in the US, December 2001....Leave a comment:
-
Re: Infinity HPS-1000 15" Powered Subwoofer Troubleshooting Help
Here is a picture of the plate amp in my HPS-1000. Thank you for any assistance in locating C4 and C6....Leave a comment:
-
Re: Infinity HPS-1000 15" Powered Subwoofer Troubleshooting Help
My HPS-1000 no longer powers up. Fuse is fine and no visible damage on printer circuit board. It has been taking longer and longer to power up recently. I can't locate the manual "Infinity_HPS-1000_Service_Manual.pdf". I am thinking I need Nichicon UHE1H220MDD 22µf/50v as well, but where is C4 and C6 located at exactly, please?Leave a comment:
No activity results to display
Leave a comment: