Re: e701i-a3 no picture but backlights
Removed bottom left ribbon cable to drivers and this is what I have. Anyone know if this is a bad left side driver? Haven't tried other side but can you tell by the picture? Dark pic in middle and I'm not sure if panel is bad....
jtcurtis
New Member
Last Activity: 01-18-2020, 08:11 PM
Joined: 12-21-2019
Location: Henderson, nevada
-
Last edited by jtcurtis; 01-11-2020, 08:40 PM. -
Re: e701i-a3 no picture but backlights
Thanks to all for creating this informative site. I've read through most all of it and a little confused about checking the lcd panel from the tconn diode. I have a reading of 9.6 ohms with bed both ribbons connected. Is that telling me I have a good LCD panel because my transistor is certainly questionable has no reading on bolts DC?Leave a comment:
-
Re: e701i-a3 no picture but backlights
I have a 701i - a3 with same symptoms picture with no sound and back light comes on. I have 480 ohms on transistor on one leg + 1.7 on the other. Is that functional? When I check the power I have no electricity on the silver capacitor no readings on the other inductors except for 100 which gives me 12.3. The transistor also gives me no electricity reading. So it ohms good but no volts. What could be the issue?Leave a comment:
No activity results to display
Leave a comment: