Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
pigpen007
New Member
Last Activity: 04-23-2025, 02:59 PM
Joined: 12-10-2019
Location: Mississauga
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • Re: UN55D6000 Blinking Standby Light

    Had 8 burnt LEDs on left and 1 on right side. Blinking light. Checked power supply, reflowed main board chips, then I found this forum.
    Ordered 20x LTW-Z5630SZL65
    [url]https://www.digikey.ca/products/en?keywords=160-2063-1-ND[/url]
    Brightness seems correct at 41 lm (33-50 lm), but the color is slightly too yellow at 6500k.
    Noticed the LEDs near the bottom seem more used (stained black?) than the ones at the top. 6 of the 8 leds burn on the left side were on the bottom 15 leds or so.
    Its been on and running for 24...
    See more | Go to post
    Last edited by pigpen007; 12-21-2019, 09:49 AM.

    Leave a comment:


  • Re: Lg 47LH40-UA

    Removing both c402 and c407 caps and placing 100pf cap instead works.
    My c407 was burnt to a crisp and it seemed smaller than the 33pf cap in parallel to it (side note that my 33pf is in the c402 spot). So I'm assuming that my c407 is a 22pf cap, unlike the 54pf which i'm seeing posted here.
    None the less, I found a 100 pf 6kv cap locally for $1.50CAD and removed the 33pf.
    Seems to be working fine. I've since ordered a few 22pf and 10pf caps if something doesnt feel right.
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X