Re: Panasonic TX-P50VT30E 7 blinks, change SC board and 8 blinks
After 2/3 hours of use
I have 7 red links again.
The mosfet of SC and SS are ok
Any recomendation?
Chuspc
New Member
Last Activity: 12-04-2019, 01:55 AM
Joined: 11-30-2019
Location: Valencia
-
Re: Panasonic TX-P50VT30E 7 blinks, change SC board and 8 blinks
Edit last post for new information......Leave a comment:
-
Re: Panasonic TX-P50VT30E 7 blinks, change SC board and 8 blinks
Hi,
I have a good news.
We unmount SS Board and i power on the TV, The led is green and the display is black.
I unmount and clean all connections of SS Board and I mount again.
The TV is power on normally, it´s correct!!!
But now i have a vertical pink band in right part of display, i add photo.
I think is a bad connection, which board can generate this efect?
At this moment:
Firts, I have seven red blinks, I change SC Board.
Second, After...Last edited by Chuspc; 12-01-2019, 07:10 AM.Leave a comment:
-
Re: Panasonic TX-P50VT30E 7 blinks, change SC board and 8 blinks
There are ok
No shortLeave a comment:
-
Re: Panasonic TX-P50VT30E 7 blinks, change SC board and 8 blinks
Hello
I add photos
The SC board you can see mount in TV is a new, MOSFET ok
The SC board yo can ser unmount os poder, MOSFET not correct
I check MOSFET with multimeter.
Thanks for your help
...
Leave a comment:
-
Panasonic TX-P50VT30E 7 blinks, change SC board and 8 blinks
Hello,
This is my first thread, i am spanish people.
I have various tech guides and i follow the procediment to repair.
I have a Panasonic TX-P50VT30E (2011 model), i have 7 blinks. I test the mosfet transistor in SC board and i get a bad result.
I think change the mosfet transistors but finally i find a new board.
In this new SC board the mosfet are ok.
I change the old SC board for new board, but now when i power on TV i have 8 blinks.
Any recomendation and test for get a solution?
The problem is SD/SU, SS or A... -
Re: 55 inch Plasma Viera (VIERA TC-P55GT30) not turning on. 7 blinking red lights.
Hello,
I have a Panasonic TX-P50VT30E, i have 7 blinks. I test the mosfet transistor in SC board and i get a bad result.
I change the SC board for other, this is a new board and i comprobe mosfet transistor are good.
Now i have 8 blinks.
Any recomend and test for get solution?
The problem is SD/SU, SS or A board?
Thanks.Leave a comment:
No activity results to display
Leave a comment: