Re: AL2416W no picture no power indicator
legs one and three are connected directly to the transformer, they are both coming from the same source on the transformer. there doesn't appear to be anything else bridge across. how do i test the transformer?...
dwalker615
Member
Last Activity: 12-25-2010, 10:42 AM
Joined: 12-23-2010
Location:
-
Re: AL2416W no picture no power indicator
-.024 Mohm on the right and left...Leave a comment:
-
Re: AL2416W no picture no power indicator
1.54vLeave a comment:
-
Re: AL2416W no picture no power indicator
on the left per the picture part number stps2045ct on the left and mbr20150ct on the right...Leave a comment:
-
Re: AL2416W no picture no power indicator
i just unplugged it, plugged it back in. and took another reading. the last wire in the harness previously .023 was reading approx 23v but was QUICKLY dropping back down to the .023 range againLeave a comment:
-
Re: AL2416W no picture no power indicator
measurements 2.0 same order
5
0
0
0
4.91
4.90
4.89
0
0
0
0
2.58
next:
0
2.58
0
0
0
0
0
0
0.028
.027
.026
.024
.023Leave a comment:
-
Re: AL2416W no picture no power indicator
left to right, per the picture, voltages are as follows
5.08
0
0
0
.04 but it counts down to about .012
"
0
0
0
0
0
0
next harness
all between 0 and .001Leave a comment:
-
Re: AL2416W no picture no power indicator
no images with a flashlight. power button does nothing. when i unplug it, and plug it back in some times i get a real brief back light flash. 165v on the cap, where do i ground to read the harness?Last edited by dwalker615; 12-23-2010, 07:53 PM.Leave a comment:
-
AL2416W no picture no power indicator
can someone please help me trouble shoot this monitor, i have searched the forums and do not appear to be having the two seconds to black problem, as i have no power indicator that appears at all. none of the caps on the power board appear to be bulging. any help would be appreciated! thanks!...
No activity results to display
Leave a comment: