Re: Buy only the plug P202 of the EAY63348801 circuit board (for LG OLED TV 55EC930V)

Pitch is exactly 2mm. A right angle pin header seem ok. Original plug has 14 actual pins that are connected to the male plug, and two additional at the bottom, to make sure the plug does not move. Attached picture is a schema of the pins of the plug on the board.
Anybody has a good site with a reference to buy this kind of plug? Thanks!...

Re: Buy only the plug P202 of the EAY63348801 circuit board (for LG OLED TV 55EC930V)

A pin was fully broken. I'll try and measure the pitch!

Re: Buy only the plug P202 of the EAY63348801 circuit board (for LG OLED TV 55EC930V)

Sadly, I don't have the broken female connector anymore (unsoldered it, then sent it via post to a friend, but the post lost it…)

Re: Buy only the plug P202 of the EAY63348801 circuit board (for LG OLED TV 55EC930V)

Here are some photos of the plug (male and female; I only need the female one). Highest def here [URL="https://frostland.fr/photos_lg.zip"]https://frostland.fr/photos_lg.zip[/URL]Re: Buy only the plug P202 of the EAY63348801 circuit board (for LG OLED TV 55EC930V)

Here are some photos of the plug (male and female; I only need the female one). Highest def here [URL="https://frostland.fr/photos_lg.zip"]https://frostland.fr/photos_lg.zip[/URL]...

Hello!

I have an LG TV which does not turn on. I know the problem has been treated over and over, but I have (I think) a different question.
I'm a real n00b in electronics, and did not want to spend too much time on my problem, so I bought the whole EAY63348801 circuit board off of eBay. However, it was delivered with a broken P202 plug. Does anybody know the reference of the plug so I can buy it separately? I have successfully unsoldered the broken one from the board, and would prefer not unsolder the one from the faulty board if possible (in case the new board does not...

Re: New Members - please post your introductions here

Hello! New to this forum, I have an issue with my LG TV, will check here if I can find some help in some already existing threads, otherwise will create a new one. Pleased to meet you!