Thank you very much , the ssd error has gone but the laptop has gone back to the same issue (after new installation when it connects to internet and updates it jammes and on restart it get stuck on loading bad and if i try to update from the Lenovo website as well it still gets jammed )
any solution for that...
myjunaid
Member
Last Activity: 04-11-2025, 07:39 PM
Joined: 11-09-2019
Location: Spain
-
I have Lenovo L 13 and it was having bios issue and it was automatically going to black screen i tried to repaid the bios but now ssd is not detecting
Can anyone please fix the bios with a fully working latest bios
before fixing the bios the laptop was detecting the ssd and it was going into windows but now its not detecting the ssd and the ME version is also empty i have attached the picture and also the main bios original file as well
SERIAL NUMBER : R9-13Z9PQ
TYPE NUMBER : 20VH-004EUK...Leave a comment:
-
Re: need unlock 835 g7
if you read it properly then post 2nd chip bin file...Leave a comment:
-
Re: Lenovo carbon X1 7th Gen pass
1- Patched file Write it to your chip and switch on laptop
2- When Thinkpad Logo Appear Press F1 or Enter Quickly
3- When you get password Screen Write 1234 then Press Enter
4- After You get HWID reply here your HWID i or someone will give you the unlock code
5- after unlock done shutdown and write your original file back...Leave a comment:
-
Re: need unlock 835 g7
are you sure you read it properly ?
read again and then send...Last edited by myjunaid; 08-05-2022, 07:16 PM.Leave a comment:
-
Re: mec 16xx dump with info block
Thank you very much for your time and for the pictures
i have done the exactly the same before with connected RST to no 7 and without connected to pin7 to RST it gives error ID verification error
it has usb C charger which i connected but i noticed i am not getting 3.3v on pin 7 but when i connect the wires and plug the usb c the laptop fan starts spinning and off for some time then on again but i have not connected the power button or i need to connect the power button and switch on by pressing it
also posts...Leave a comment:
-
Re: mec 16xx dump with info block
Sorry its T490s
i have done exactly how you asked me to but i am getting ID Verification error MEC Chip ID: 0xFFFFFFFF
also disconnected rst still nothing
my cables are also less than 10cm...Leave a comment:
-
Re: mec 16xx dump with info block
you mean 10k resister on pin 7 line as in pictures
also where can i get the 10k from the mainboard to do the job once done i can move back is that ok
you can tell me the resistor number i have boardview i will find it...Leave a comment:
-
Re: mec 16xx dump with info block
Can Someone please explain me how to read the mec properly
as i used the isp pins from the top area but it gives error MEC Chip ID: 0xFFFFFFFF. 090: ID verification error.
but if i use the isp colorful cable then can someone explain me which pins are TMS, TDI, RST on Rt809h plz see the picture
also i moved the resistor now to left side is this okay ?
also pin no 6 there is no resister can i remove from the same board from other location and use here if i really need to ?
will appreciate your...Leave a comment:
-
Re: mec 16xx dump with info block
Thanks for your time and i will update you the outcome...Leave a comment:
-
Lenovo T490s
i got a t490s someone tried to work already on it when i opened i saw there are some missing pads and the resistors are moved from the actual position
can someone please upload the picture so that i can compare what is missing and also the right direction to connect the resistors as i dont have the board view
also will appreciate if someone has the board view or same area picture
and system is not switching on can someone guide me please...Last edited by myjunaid; 07-28-2022, 07:59 PM. -
Re: Please need unlock 830 g8
Hp 830 G8 both files are 32mb
one is front side
one is back side
would appreciate if someone can help me out because rcunlocker does not accept 32mb file
also will appreciate if someone can give me the tool or guide me how to remove as i have 3 more to doLast edited by SMDFlea; 03-26-2023, 02:38 PM. Reason: Deleted attachment due to low server space, March 2023Leave a comment:
-
Re: Apple Macbook Pro A1990 15" - T203 or CH341 with Mina ?
iRizwan
"""Both hardware method and software method possible only if it is with Old BridgeOS.
See the Post https://www.badcaps.net/forum/showpo...&postcount=646""""
hi i cannot open your linkLeave a comment:
-
Re: HP ProBook 650 G2
Vesko356.. Thank you very much for your time and the effort it worked fine
i really appreciate
once again thanks alot broLeave a comment:
-
Need help to remove admin pass HP 650 G2
Hp Probook 650 G2 i tried 2 times with Hpunlocker but still it has admin password
i did not remove the chip from the board i read through the cable and then erased and then programmed after unlocked from hp unlocker
but 2 times still showing admin password
can someone please remove the admin password from my this original file
Thanks in advance...Leave a comment:
-
Re: Need Help HP 1040 G1 Bios Password
Thank you very muchLeave a comment:
-
Need Help HP 1040 G1 Bios Password
Hi Can any one please help me out to remove the password for Hp 1040 G1
there are 2 bios chip this is the first chip Bios 1
file size 16MB
Thank you in Advance...Leave a comment:
-
Re: Need Help A1286 2012 EMC 2556 bios password
Thank you very much it workedLeave a comment:
-
Re: Need Help A1286 2012 EMC 2556 bios password
please check my last message i have read the file from 2 different programmer have a look i think now its fine
i remember you helped me out long time ago in my Hp bios for that Thank you very much...Leave a comment:
-
Re: Need Help A1286 2012 EMC 2556 bios password
Thank you for the softwares yes my Programmer was detecting wrong chip
i have read the file with neo programmer and the as programmer
both files attached now with their pictures and now i can also find $SVS
you can check and if possible clear the efi lock for me will appreciate...Leave a comment:
No activity results to display
Leave a comment: