Re: Dps 800 fan not working and variable voltage



If you don't want to help. Don't comment. Thanks...

Re: Dps 800 fan not working and variable voltage

No one? :/ Or some who can tell me which one is the startup capacitors

Re: Dps 800 fan not working and variable voltage



I did same of this video

[url]https://youtu.be/9--g63ew9HU[/url]

Problem came after I closed it and tested again. Turned off and it didn't worked againRe: Dps 800 fan not working and vari...t worked againRe: Dps 800 fan not working and variable voltage



I did same...

Re: Dps 800 fan not working and variable voltage

No one? :/ I think I have to pay someone to repair it

Hey guys. Well I'm having a problem with my dps800. It's about a capacitor I think. You are the experts. I was trying to reach 14.3v and it turned off... After that, the fan looks like try to work but it just make a little move.
The voltage change so fast as you can see in the video.
I really appreciate you help guys. You are awesome.

[URL="https://youtu.be/TON-OkevRDg"]https://youtu.be/TON-OkevRDg[/URL]Hey guys. Well I'm having a problem with my dps800. It's about a capacitor I think. You are the experts. I was trying to reach 14.3v and it turned off...

Re: DPS 800 ruined




Thanks for the info about reading Voltage.

Yes I opened it because I needed to hack the ovp, I removed one pin of a chip. after that, it was sending more than 13.7, before it if I went to 13.8 it activat the protection.

As shown on minute 3:47
[url]https://www.youtube.com/watch?v=9--g63ew9HU[/url]


Polarity is totally correct, Actually it was working yesterday night on my car, I removed the ovp, Took it to 14.3v, and left it in my desk, today in the morning I used it and boom...

Hey guys, sorry if I look like one more idiot asking for help, but I really need your support and knowledge, I have a dps 800gb, I bought it because I needed to flash my BMW, maybe some of you don't know but when you flash with the program of BMW, the car needs 13v minimum, Only with the battery you get like 11.5v, the program won't work with that voltage, program stop when you are under 13. Anyways, I found good hardware to support the car with voltage but so expensive options.

Well, After asking in some BMW forums I found that a PSU could help, a friend told me that he uses a DPS...

Re: New Members - please post your introductions here

I'm new here, I'm stating with psu for bmw flashing, Am from Mexico and hope I can learn much from you guys!