Screen appears black (with backlight on) when turned on without the LVDS cable connected.

Signals after the level shifter still seem off. Signals before it seem fine.

(Yellow: GSP signal before level shifter used as trigger, Purple: GCK1-GIP after level shifter).

[ATTACH=JSON]{"data-align":"none","data-attachmentid":"3167786","data-size":"large"}[/ATTACH]

PS: I'm rather new to the forum, I just noticed that there is a "Computer Displays" Section. I'd be grateful if a moderator...

None of the clock signals (GCK1-GIP to GCK4-GIP) are shorted , they all measure about 400 k to ground.

I believe I've narrowed down the issue to the level shifter (IC2), a Novatek NT50413S.

The signals before it are good (GSP and GCK), as shown below. I have a nice 60 hz signal on GSP with the screen connected to a camera's hdmi out, and the GCK frequency (67.47 KHz) seems about right for 1 pulse per row (not that I've counted them).


[ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3167741}[/ATTACH]...

Hello from Panama, Central America.

I've repaired a couple of personal devices in the past, but I'm stumped with a MSI monitor, so I'm joining the club.