Re: LG lcd panels WUG series, compatibility?

I found a datasheet for this LC420WUG (SC) (A1), and for this other LC420WUG (SB) (A2) I can't find anywhere, as if it was produced on Krypton
I have a faulty LC420WUG (SB) (A2) screen so I would install one if LC420WUG (SC) (A1) compatible.
both are ful HD, and have 2x60 pin mini LVDS, the only question is whether the layout in the connectors is the same
Thank you...

Does anyone know if the LG panels are compatible LC420WUG (SC) (A1) and LC420WUG (SB) (A2)?

Re: Lg 42LD450 after inserting the software, get stuck in the boot loop

This is a similar topic [HTML]//www.badcaps.net/forum/showthread.php?t=56571[/HTML]
I tried to connect via rs232 port with hyperterminal but in the prompt it doesn't throw "Mstar #" or "duoglas" but HyperTerminal - BC ^ [^ [^ [^ [^ [^ [^ [
What would this mean? ...

Re: Lg 42LD450 after inserting the software, get stuck in the boot loop

Didn't anyone have a situation where improper firmware was inserted into tv lg, which caused tv to go into the boot loop, and successfully solved it?

For the TV from the title (Lg 42LD450-ZA) which was damaged by the motherboard during the thunderstorm, I got the board from China. The board is the same model but for the Chinese area, the Chinese TV model is 42LD450-CA.
The old board and the Chinese are identical, only this Chinese has a different tuner.
Everything worked great, except of course DVB-t because the tuner is different (probably they have a different standard)
The devil did not give me peace so I went to insert the software from the European version (Lg42LD450-ZA), everything went fine, the tv recognized the...

Re: LG 42PQ200 Plasma has image traces only in some places on the screen

Sorry, I didn't say I already tried the correct z-sus board.
The same goes for the other z-plate.
It's the only plate I could get to try.
Is it possible that the problem is in the control board or the plasma panel itself?

Producer -LG
Model No / 42PQ2000
Chassis / PD92A
Main board / EAX57566204
Y-SYS Board -42G2A-YSUS
Z-SYS Board -42G2A_Z
Plasma Display / Panel -PDP42G2 ####
Hello all electronics lovers, this is my first post.
I have a problem with one LG Plasma, which is the following:
The LG 42PQ200 Plasma has image traces only in some places on the screen
Fault description and description of actions taken and measurements on the appliance -
The mistake is, as I said in the introduction (there are traces of the image only in some places),...

Re: New Members - please post your introductions here

Greetings to all electronics lovers from Ivica from Croatia