Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
WaShErE
Member
Last Activity: 04-18-2024, 02:00 AM
Joined: 08-29-2019
Location: Istanbul
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • WaShErE
    replied to Dell Xps 13 9370 bios
    Re: Dell Xps 13 9370 bios

    Hello every1,
    Keyboard light coming on then it shut down itself, i think its a bios issue. May i have a good bios?
    Thank you, appreciate.

    ST:H9GWMQ2...
    See more | Go to post

    Leave a comment:


  • Dell Xps 13 9370 CAZ60 LA-E671P Sometimes boot sometimes not and shutdown it self..

    Hello everyone, i just received from a friend Dell xps 13 9370 AKA CAZ60 LA-E671P board number. It has liquid damage in past and attempted to repaired twice from two different repair shop. laptop sometimes comes on and barely work 2minutes and come off, most of the time keyboard lights up, fans turns and come off. Also led shows weak battery (3white 1orange).

    After opened it, i couldnt see any liquid damage because they cleaned it, couldnt find any short circuit in my knowledge. They touched bios chip may be path damaged because of liquid damage thats all. I tried cmos reset, take...
    See more | Go to post
    Last edited by WaShErE; 03-06-2023, 03:13 AM.

  • Re: Graphics card Schematics and Boardviews

    Wow, im so glad that i found this topic. Thank you a lot guys.

    I would like to ask if anyone have 6990m schematic. I have an old notebook clevo, i want to check GPU if i can repair.
    See more | Go to post

    Leave a comment:


  • Re: 820-3115-b



    Morning, i was meaning im getting P3v3_S0_EN_L i have 3.3V but now i have 0.41v on P3v3_S0 which is not normal i guess? This is my first macbook experience.

    On youtube video he doesnt have video on screen and fan ramp up, he jump a wire from R7382 pin 2 to Q7812 pin 3 because he doesnt have voltage on pin 3 and he get video on screen too. Thats why i tried it....
    See more | Go to post

    Leave a comment:


  • Re: 820-3115-b

    I just saw a youtube video, fan always high no video on screen then i checked the Q7812 pin3 i have 0V then i injected 3.3v there after that i checked voltages all now present but fan start with high now, not getting faster like before and still nothing on screen.
    See more | Go to post
    Last edited by WaShErE; 03-08-2020, 01:20 PM. Reason: add

    Leave a comment:


  • Re: 820-3115-b

    So i need to reflash bios? I didnt do it before, as i know i need to copy serial number from dump file to a new bios file right? And do you have a copy of that or where can i find macbook efi bioses for future purpose? Thanks a lot piernov. I will try on Tuesday i guess i just bought ch341a for program it.
    See more | Go to post

    Leave a comment:


  • Re: 820-3115-b

    There is no U3403-U3404-U3401-U7960 are they present? because when i checked the pdf not written nostuff.
    See more | Go to post
    Last edited by WaShErE; 03-08-2020, 08:45 AM.

    Leave a comment:


  • Re: 820-3115-b



    Hello piernov,

    PPVCORE_S0_CPU is 0.891V, it is beeping without sticks also i tried with single stick.

    Board naked fan run first normal speed and getting faster in 5sec, i forgot to mention....
    See more | Go to post
    Last edited by WaShErE; 03-08-2020, 07:38 AM.

    Leave a comment:


  • 820-3115-b

    Hello every1,

    I got a macbook for repair, i have green light + fin spin but no post + no backlight+ no video on screen.

    I have vcore, c9796 was corroded and i changed it. Before me, also one person attempt to repair and i saw flux near pch and cpu area. On lvds cable dont have LCD_IG_PWR_E so i dont have any voltage on pin 2,3,4. U9000 i have input 3.3V but no output.

    I dont have any light on USB when i plugged in it, no caps lock light either.

    I tried PRAM reset nothing changed.

    History is, one day owner opened it up...
    See more | Go to post

  • Re: New Members - please post your introductions here

    Hey every1,

    I was it manager, now unemployed and i figured out that i'm in love with electronic repair. I'm 39 but i dont think so its late.

    I always check badcaps first for research faults.
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X