Re: LG 42lh4000 no picture
Sorry, perhaps I was misunderstood - there is no half screen white -> a)-d) always full screen white.
I checked the voltage from the socket at PSU to MB:
- Written on the PSU board it says 20 V, but I measured the following after pressing the turn on button: 22.1 V, drops to 21.6 V, stays there for a moment, than buzzer noise starts and it stays at 21.5 V.
- 12 V: I measured 12.4 V the whole time.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: LG 42lh4000 no picture
Thanks for your reply!
I tried the following:
a) disconnected T-CON totally (from main and both side ribbon cables to panel)
b) disconnected T-CON from both side ribbon cables to panel
c) disconnected T-CON from left side ribbon cable to panel
d) disconnected T-CON from right side ribbon cable to panel
a)-d) There's no difference of back light (white screen) and arc sound.
The arc sound starts some moments after booting the TV: White screen starts quite intensive, after some milliseconds...
Leave a comment:
-
LG 42lh4000 no picture
Hello,
tv model LG 42lh4000
mainboard EAX60686902 (0)
t-con EAX58017201 (9)
psu model EAX55357701/32 (rev 1.3)
The picture got dark from top right to bottom left while using and then it didn't show anything again. I can turn it on and the back light comes up, sound works, but no picture, OSD, ...
There's a soft hum (perhaps electric arc sound) around the two LIF42-inverters on the psu, but perhaps that's normal.
I tried to follow some material from LG Training Center for the 42LH50, but the 42LH4000 has...
-
Re: New Members - please post your introductions here
Hello I'm Hans from Munich, Germany.
Leave a comment:
No activity results to display
Show More
Leave a comment: