djob1981
Member
Last Activity: 03-12-2025, 03:13 AM
Joined: 07-03-2019
Location: scunthorpe
-
fa2 fuse gets a solid 3.3v when turned on and fv1 20vLeave a comment:
-
When turned on pin 1 on uv1 fluctuates, pin 4 get 3.3, pin 5 has 1.8v, pin 3 is 3.3v...Leave a comment:
-
uv1 has no voltage on input side with just charger plugged in and board out of laptop...Leave a comment:
-
also tried 3 screens same issue...Leave a comment:
-
Lenovo V15 g2 ALC no backlight
Got no backlight on this laptop, checked fv1 fuse was bad so replaced it with a new one and replaced the shorted cap next to it and l aso replaced the lcd cable as pin3 on the cable was burned. I now get 20v at those pins and get an image on ther laptop screen but still no backlight.checked fa2 fuse and is fine but gets no volts(unsure if this is right) and has a 0.33v drop to ground when testing ..
Anyone got ideas where else i should look... -
G513QM
SN: M7NRKD01932226D
i have attached the dump from the W25Q16FW...Leave a comment:
-
hi need a bios for
Lenovo ideapad flex 5 16ALC7
s/n PW03XCCH
MTM: 82RA0041UK
solid caps lock no screen
bios dump attached...Leave a comment:
-
thank you...Leave a comment:
-
Looking for a BIOS for Legion 5 - 15ARH05
S/N: PF209XD4
MTM: 82B10062UK
thanks in advance
Orig dump attached...Leave a comment:
No activity results to display
Leave a comment: