Re: Gateway FPD2185W power button blue no responce

I know the caps I put in there are not the best I was just trying to get it to fire up and display a picture before I put to much money into it. I knew the originals were SAMXON 470uf 25V I replaced them Xicon 470uf 35V it was the only ones available in our area I figured if it fired up I would replace all of them with better caps. I was all excited when I seen so many folks getting theirs working with just a few caps. Wouldn't these Xicon caps at least let it fire up?
here is a picture of the power board [URL="http://www.hightekhillbilly.net/FPD2185W/images/powerboard.jpg"]http://www.hightekhillbilly.net/FPD2185W/images/powerboard.jpg[/URL]...

Re: Gateway FPD2185W power button blue no responce

I replaced all 3 already on the video board as well

First off let me thank you all for all this information on this forum. I have lurked around this site and fixed several monitors and motherboards due to caps.
I was given this monitor it was working then it just blacked out on them. The power Button is a constant blue no matter what you try to do. I replaced 13 caps and still can't get power to the back light connections the power board has power all through it until it get to this [URL="http://www.hightekhillbilly.net/FPD2185W/images/icman.jpg"]http://www.hightekhillbilly.net/FPD2185W/images/icman.jpg[/URL]
I have attached...