Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
this is the zip of the f9000 bin...
Frank29578
Member
Last Activity: 10-24-2020, 04:29 PM
Joined: 04-11-2019
Location: Rotterdam
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
i must see how to upload the BIN on this forumLeave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
oke thanks
i have seen a sek2500u on ebay that should definitely work on the F9000Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
I paid 100 euros for the F9000 do you think it was a good price?Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
or is there also a way to put the new firmware on the f9000 eeprom, with the eeprom reader?
i have the ezp2019 programmer
or put the eeproms from the hu7500 in the F9000 ?
the hu7500 has a broken schreenLast edited by Frank29578; 04-26-2019, 12:47 PM.Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
or i need the sek3500u firmware bin to put in the js9000 box,
but you think the f9000 has been repaired?...Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
I look another day again I'm tired of itLeave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
I am now heating the BGA
...Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
oke but no Resistors
...Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
...Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
...Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
I don't know exactly what to measure. but if I measure between the connector that goes to the box and the conector on the mainboard that goes to the tcon, I also measure value, so it also seems goodLeave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
I can measure something but I don't have an oscilloscopeLeave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
thanks but menu 182 does not work / tv turns on when I press 1...Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
I have never experienced that a js9000 box find no connection at all with another model of TV. I've seen them working on the hu series, s and F9000 more often. upside down image and always message that it is not suitable and switches off
as much as I hope my f9000 has been repaired. yet I do not believe that it is the one connect boxLast edited by Frank29578; 04-24-2019, 04:23 PM.Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
I hope the mainboard is fixed
but that person Davideu also had an image before programming it. but fell out and gave the message this box is not suitable. so that's not the problem here i think...my f9000 doesn't even find the connectbox
and my js9000 box is from an ue55js9000 and the tv is also a ue. ue55F9000, I am from the NetherlandsLeave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
No, that is not true. you only have to adjust software or service menu otherwise it will restart every 20 seconds. just like the js9000 box do on the hu7500
the hardware of the js9000 box is the same as in the sek-3500uLast edited by Frank29578; 04-24-2019, 10:32 AM.Leave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
maybe a Bad bga chip on the mainboard? that it does not receive a signal from the connect box??
I hope I find another mainboard because I'm tired of itLeave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
yes i only have 1 cable. I tested it again on the HU7500 just worksLeave a comment:
-
Re: OMG SAMSUNG UN55F9000 Ultra HD, SMART, 3D 4K
thank you i just tested. and all voltages are present. so weird that it doesn't work
I have 3.3v 5.3v 5.3-v 12.4vLast edited by Frank29578; 04-23-2019, 07:57 PM.Leave a comment:
No activity results to display
Leave a comment: