Re: 10 year old Cooler Master RS-850-EMBA
Attached a hard drive and now I'm getting the following with my dvm:
12v = 12.17
5v = 5.08
3.3v = 3.39
Looks like it needed a load like you said. Now I'm wondering if I should use as-is or think about re-capping.
Thanks,
Nick...
nickb
Member
Last Activity: 06-18-2023, 09:59 PM
Joined: 10-28-2006
Location:
-
Re: 10 year old Cooler Master RS-850-EMBA
Just the motherboard, nothing else connected.Leave a comment:
-
Re: 10 year old Cooler Master RS-850-EMBA
The numbers I posted above were from the bios screen. Here's from the meter:
12v = 12.19
3.3v = 3.33
5v = 4.37
I'll track down a 20v light and try the test you mentioned. Thanks.Leave a comment:
-
Re: 10 year old Cooler Master RS-850-EMBA
I've been running it for over an hour plugged into an Atom 330 board. Nothing else is plugged in, it's just sitting on the bios screen where I can monitor temps and voltage.
Voltages look good so far, checked with a meter and am getting 12.2 volts, 3.33 volts, 2.52, and 4.39. The 5 volt rail seems low but will let it run for a while longer and then take a look.Last edited by nickb; 06-27-2020, 03:54 PM.Leave a comment:
-
10 year old Cooler Master RS-850-EMBA
I bought this 10 years ago and used it for maybe 6 months before it went into storage. I recently popped it open to clean out the dust and found all caps look to be in good condition (no leaking/bulging). Is it okay to put this back into service or is this something I should toss or attempt to re-cap?... -
Re: New Members - please post your introductions here
Joined a long time ago, but hello!Leave a comment:
No activity results to display
Leave a comment: